Spectrum™ S-920N Series Scalable solutions for high-volume manufacturing and assembly Features and Benefits The S-920N series leverages over 25 years of Nordson ASYMTEK automated fluid dispensing and jetting technology Scalable design matches current and future requirements for maximum return on investment Software-controlled features improve yield, minimize operator intervention, and enable complete recipe transfer to other sites A flexible number of heating zones with optional Controlled Process Heat (CpH) minimizes processing time MH-900 series loaders/unloaders can be added to create an island of automation or for inline production capability The scalable Spectrum™ S-920N series with Fluidmove®XP (FmXP) software is ideal for highvolume production of advanced dispensing processes, including underfill, cavity fill, die attach, and encapsulation. Scalability . With its flexible, scalable configuration, the S-920N can be configured with single or dual lanes, and up to six heat stations with the dual lane configuration. The platform is easily upgraded when process needs change. The S-920N maximizes use of floor space — it is 600 mm wide (without the optional pre- and postheat stations), half the width of other dispensers on the market. Advanced Process Control. The S-920N reduces process variation, increases yield, and reduces cost. Software-managed temperature, fluid and air pressure provide closed-loop control that eliminates the need for operator adjustment. Calibrated Process Jetting (CPJ) automatically maintains volumetric repeatability during long production runs. Controlled Process Heat (CpH™) adds recipe-controlled heat management for improved thermal efficiency. The Spectrum’s digital vision system with dualcolor, adjustable on-axis lighting offers fast and reliable image acquisition. Adding the Fids-on-the-Fly™ option accelerates fiducial capture, and laser height sensing further reduces time spent on non-dispense routines. Jet Technology . Patented non-contact jetting offers many advantages over traditional needle dispensing. The DispenseJet® valve shoots “on the fly” using a patented high-speed mechanism, jetting precise volumes of fluid in dots, lines and patterns with flow rates up to 500 mg/second and 200 dots/second. Jetting overcomes the limitations of needle dispensing — no bent needles, no chipped die, no dripping, less sensitivity to surface height variations — and has the ability to dispense material into tight spaces without slowing down. Value . With a reputation for innovation, comprehensive process solutions from Nordson ASYMTEK ensure a maximum return on investment and low cost of ownership. From initial process development through full scale production, you are supported by our experienced worldwide engineering, applications development and technical service network.

S-920N Series Features Standard features Optional features Calibration module: patented Mass Flow Control Module with scale, vacuum purge, and fiducial marks for automatic setup CPJ – Calibrated Process Jetting Digital vision system Light beacon with audible alarm Low pressure sensor Programmable fluid and valve pressure Tactile height sensor Ventilation exhaust system CpH™ - Controlled Process Heat Contact or impingement heat tooling Dual valves: dual action (two applicators operate independently); dual simultaneous (two applicators on one synchronous head) Dual-lane configuration – Model S-922N...

Lower Your Cost of Ownership The Spectrum S-920N series lowers cost of ownership with: • A smaller footprint frame Flow-rate monitoring to minimize material waste and increase process yield Tight temperature control using software-managed jet/needle heaters Fast non-contact jetting that reduces yield loss associated with needle dispensing Dual lane conveyors (S-922N) for higher throughput or feeding a dual-lane placement system without need of a shuttle Key Features for Enhanced Throughput and Process Control Custom-Designed Contact and Impingement Tooling: Heated tooling with low-mass design...

Specifications: Spectrum™ S-920N Series Motion System X-Y placement accuracy: Z repeatability: X-Y repeatability: X-Y acceleration: X-Y velocity: Facilities Requirements ±0.050 mm (0.002 in.), 3 sigma ±0.025 mm (0.001 in.) ±0.025 mm (0.001 in.) 1 g peak 1 m/s peak (40 in./s) Vision and Lighting Camera resolution: Field of view: Lighting: System footprint: Air supply (4): 640 x 480 pixels 7.0 x 5.0 mm (0.28 x 0.20 in.) Red/blue LED with 255 independent light levels for each color Computer Laptop with Windows XP operating system Software Fluidmove® for Windows XP Power (mains): Ventilation (5):...

Specifications: Spectrum™ S-920N Series Dimensions are in millimeters SIDE VIEW speak with your local representative or contact your regional office. Nordsonasymtek.com North America Headquarters Carlsbad, CA, USA +1.760.431.1919 [email protected] China Shanghai +8621.3866.9166 [email protected] Beijing +8610. 8453.6388 [email protected] TOP VIEW FRONT VIEW Guangzhou +8620.8554.0092 [email protected] Europe Maastricht, Netherlands +31. 43.352.4466 [email protected] Japan Tokyo +81.3.5762.2801 [email protected] Korea Seoul +82.31.765.8337...