Spectrum S-910N Series
5Pages

Spectrum™ S-910N Series Scalable solutions for high-volume dispensing applications Features and Benefits Slim design maximizes floor space utilization and lowers cost of ownership Digital vision system provides high-speed image acquisition A variety of conveyor belts and clamping options handle the most challenging parts or carriers CAD Import software for quick and efficient offline programming Pre- and post-queue stations can be added for higher throughput or as buffer stations added to create an island of automation or for inline production capability The scalable Spectrum™ S-910N series with Fluidmove®XP (FmXP) software is ideal for highvolume dispensing applications that do not require heat, such as SMA, silver epoxy, solder paste, corner- and edge-bonding. Scalability . With its flexible, scalable configuration, the Spectrum S-910N series can be configured to meet your current capacity requirements while allowing future upgrades to add options such as a pre-queue station. The S-910N maximizes use of floor space — it is 600 mm wide (without the optional pre- and post-queue stations), half the width of other dispensers on the market. Advanced Process Control. FmXP software offers advancements in throughput, fluid management, and process control. With multiple layers of operational control, FmXP can accomplish basic production tasks while providing a userfriendly interface for program development. Adding the patented Calibrated Process Jetting or Mass Flow Calibration (for needle dispensing) options ensures that volumetric repeatability is maintained during long production runs for increased dispense accuracy and improved process capability (CpK). The Spectrum’s digital vision system with dualcolor, adjustable on-axis lighting offers fast and reliable image acquisition for increased throughput. Jet Technology . Patented non-contact jetting offers many advantages over traditional needle dispensing. The DispenseJet® valve shoots “on the fly” using a patented high-speed mechanism, jetting precise volumes of fluid in dots, lines and patterns with flow rates up to 500 mg/second and 200 dots/second. Jetting overcomes the limitations of needle dispensing — no bent needles, no chipped die, no dripping, less sensitivity to surface height variations — and has the ability to dispense material into tight spaces without slowing down. Value . Nordson ASYMTEK leverages over 25 years of automated fluid dispenser and jetting technology to design and manufacture a full line of dispensing and coating systems. With a reputation for innovation, comprehensive process solutions from Nordson ASYMTEK ensure a maximum return on investment and low cost of ownership. From initial process development through full scale production, you are supported by our experienced worldwide engineering, applications development and technical service network.

S-910N Series Features Standard features Optional features CAD Import software Calibration Module: vacuum purge and fiducial marks for automatic setup Digital vision system Light beacon with audible alarm Low pressure sensor Manual fluid and valve pressure setting Tactile height sensor Calibrated Process Jetting (CPJ) or Mass Flow Calibration (MFC) for fluid weight calibration and automatic flow rate adjustment (Nordson ASYMTEK patented) Dual valves: dual action (two applicators operate independently); dual simultaneous (two applicators on one synchronous head) Dual-lane configuration –...

Lower Your Cost of Ownership The Spectrum S-910N series lowers cost of ownership with: • A smaller footprint frame Flow-rate monitoring to minimize material waste and increase process yield Tight temperature control using software-managed jet/needle heaters Fast non-contact jetting Dual lane conveyors (S-912N) for higher throughput or feeding a dual-lane placement system without need of a shuttle Optional software control of valve pressures to minimize operator intervention Key Features for Enhanced Throughput and Process Control CAD Import Software for SMA, Solder Paste, and Silver Epoxy...

Specifications: Spectrum™ S-910N Series Motion System X-Y placement accuracy: Z repeatability: X-Y repeatability: X-Y acceleration: X-Y velocity: Conveyor ±0.050 mm (0.002 in.), 3 sigma ±0.025 mm (0.001 in.) ±0.025 mm (0.001 in.) 1 g peak 1 m/s peak (40 in./s) Vision and Lighting Camera resolution: Field of view: Lighting: 640 x 480 pixels 7.0 x 5.0 mm (0.28 x 0.20 in.) Red/blue LED with 255 independent light levels for each color Computer Laptop with Windows XP operating system Software Fluidmove® for Windows XP Fluid Delivery Method Supports all Nordson ASYMTEK jets, piezo-activated...

Specifications: Spectrum™ S-910N Series Dimensions are in millimeters SIDE VIEW speak with your local representative or contact your regional office. Nordsonasymtek.com North America Headquarters Carlsbad, CA, USA +1.760.431.1919 info@nordsonasymtek.com China Shanghai +8621.3866.9166 china-info@nordsonasymtek.com Beijing +8610. 8453.6388 china-info@nordsonasymtek.com TOP VIEW FRONT VIEW Guangzhou +8620.8554.0092 china-info@nordsonasymtek.com Europe Maastricht, Netherlands +31. 43.352.4466 cs.europe@nordson.com Japan Tokyo +81.3.5762.2801 Info-jp@nordsonasymtek.com Korea Seoul...