The Nordson WM 710 pneumatic bead gun features an innovative reverse-needle stroke function to produce excellent adhesive cutoff. The integrated needle and seat closes against the direction of material flow. This causes excess material to be pulled back into the gun significantly reducing nozzle dripping.The WM 710 pneumatic gun is ideal for slotnozzle applications and low- to medium-speed intermittent packaging, corrugated, and bag-and-sack manufacturing. Fast air-open, air-close gun operation complements clean cutoff to provide reliable pattern uniformity.Gun cycle times of 10.5 milliseconds (12.7 W) or 12 milliseconds (5.4 W) and a minimum service life of 30 million cycles deliver reliable response and long service life. Compact vertical gun-mount bracket simplifiesinstallation and service. Vertical micro-adjust control facilitates critical gun positioning. Efficient control piston handles a wide range of adhesivetypes and viscosities. > Efficient operation improves pattern and product quality. Removable gun cartridge expedites servicing withoutbracket disassembly and time-consuming repositioning. Reverse-needle stroke action delivers accurate cutoffand retards adhesive build-up on the nozzle. Quick-disconnect air fitting and pre-mounted solenoid speed installation. Integrated needle-and-seat design improves adhesiveflow. Corrosion-resistant materials on all wetted components and a stainless-steel needle help prolonggun life. Narrow body profile fits easily on most parent machineryand slot nozzles. >

Compact body size fits easily on most parentmachinery and slot nozzles. Efficient gun-mount bracket provides vertical micro-adjustment for critical positioning. A wide selection of nozzle orifice diameters and pattern plates meets diverse pattern requirements. Specifications Working Hydraulic Pressure 36 bar (529 psi) Maximum Hydraulic Pressure 100 bar (1470 psi) > 14 mm(0.55 in.)25 mm(0.98 in.)5.5 mm(0.22 in.)65 mm(2.56 in.)90.5 mm(3.56 in.) Operating Air Pressure 0.5 to 6 bar (7 to 88 psi),4 bar (59 psi) recommended > M6(2x) Minimum Cycle Time* 10.5 ms (12.7 W), 12.0 ms (5.4 W) Nozzle Diameter...