Unity™ Series Dispensing Systems Precise, repeatable dispensing of heated materials from syringes. Nordson® Unity dispense systems provide accurate dispensing and optimize efficiency of heated materials from 30 cc syringes and 294 ml cartridges, and are ideally suited to dispense heated PUR adhesives. Unity dispensers help extend the useful life of the syringe to maximize material use and minimize residual waste. A variety of technologies meet the stringent requirements for precise material dispensing in exacting processes such as handheld electronics and medical device manufacturing. This helps improve production and performance of applications including bonding, sealing, gasketing, encapsulation and attachment. With a variety of systems and accessories, Unity solutions can be configured to meet specific requirements. Unity PS Series n ime and pressure delivery system. T n pen needle design uses disposable, stainless-steel dispensing O needles. n Standard single head system can be expanded to four heads. n hree-axis robot offers complete work cell with small T footprint. Unity PURJet™ Series n Consistent dispensing and clean cutoff for beads or dots. n atented jetting technology means Z plane doesn’t need to P constantly adjust for changing surface contours. n pplies at high speeds with precise accuracy. A n ccommodates a wide variety of hot melt materials A including polyurethane (PUR). n asily dispenses into 0.5 mm grooves and other challenging E geometries. n ptimizes adhesive wetting of substrates for improved strength O and impact resistance. Unity IC Series n neumatic modules deliver consistent dispensing and clean cutoff P for beads. n ision detection system provides integrated inspection, V proprietary compensation and feedback. n perating costs are reduced by prolonging syringe and cartridge O life and minimizing bead width variation. n ulti-axis robot eliminates manual operations. M

Unity™ Series Dispensing Systems Container Size 30 cc syringes 30 cc syringes 294 ml cartridges Compatible with x,y,z Robot Minimum Deposited Bead Width (mm) Positive Volumetric Output Non-contact Dispensing Optimized Adhesive Wetting for Strength and Impact Resistance Patented Integrated Controller System Vision-based Compensation to Control Bead Size Available with or without Robot Utilizes Stainless-steel Dispensing Needles Pneumatic Actuated Dispensing Module Removable/Interchangeable Nozzles *Dot size approximately 1.1 mm depending on substrate; bead weight 0.22 mg minimum; can dispense...