SLL9023
2Pages

Catalog excerpts

KB50 KB100 Melt Unit Features • All electric models operate from 230 V˜ power source • No compressed air reduces maintenance costs and downtime • 1–2 hoses with handguns 1–6 hoses with automatic applicators • Temperature control options range from thermostat to microprocessor • High torque, high rpm motors for low maintenance and long life • Reliable, smooth output gear pumps to handle a wide range of materials • Teflon-lined melt tank reduces char and minimizes degradation buildup High Performance Hotmelt Adhesive Dispensing The KB50 and KB100 Melt Units are ruggedly designed for a wide range of adhesive and sealant applications. With capacities up to 50 lb (22.7 kg) or 100 lb (45.4 kg) of hotmelt material in pillow, pellet, slab or bulk form, the melt unit concentrates heat at the tank bottom, while maintaining cooler temperatures at the top. This performance characteristic minimizes adhesive degradation, charring and foreign matter accumulation. • Finned melt grid in tank bottom increases melt rate for fast warmup and continuous melting • High performance pump rates up to 395 lb/hr (179 kg/hr) • Supported by high performance pattern controllers, head drivers and automatic flow controllers The industry-proven KB50 and KB100 feature a finned melt grid in the tank bottom to increase melt efficiency and reduce warm-up time. The tank optimizes heat transfer to the material as it moves into the pump inlet, eliminating hot spotting problems. Molten material can be dispensed intermittently or continuously to as many as six heated supply hoses. Melt units may be configured with microprocessor, proportioning or bimetallic thermostat temperature control, depending on the application requirements. A choice of positive displacement gear pumps, coupled with a variety of durable electric drive motors provide optimal performance for most manual or automatic dispensing applications. Replaceable 50 mesh pump filters are available for applications requiring filtration. KB100 High performance pattern controls on Melt Stand ®

Open the catalog to page 1

Specifications Physical Performance Tank Capacity KB50 - 50 lb (22.7 kg) KB100 - 100 lb (45.4 kg) Weight (full) KB50 - 110 lb (50 kg) KB100 - 185 lb (83.9 kg) 30-45 minutes Hose Capacity KB50/100 - 1-2 handgun hoses 1-6 automatic head hoses Height KB50 - 24.5 in. (62.2 cm) KB100 - 41.25 in. (104.7 cm) Warm Up Time Electrical 230 V , single phase, 50/60 Hz ˜ KB50: 4200 W KB100: 4700 W KB50 - 14 in. (35.5 cm) KB100 - 14 in. (35.5 cm) Length KB50 - 29.25 in. (74.3 cm) KB100 - 29.25 in. (74.3 cm) Additional System Wattage 25–30 W per foot for hose 200–600 W per applicator Mounting Dimensions...

Open the catalog to page 2