Process Air Control Kit Efficient control of process air enhances hot melt adhesive spray pattern consistency and nozzle performance. I mproves adhesive add-on control Line reference signal control provides real-time response Air inlet accepts unfiltered, unregulated supply air Easy-to-read LED display provides quick reference R egulates pressure fluctuations Enhances bond quality Air outlet produces filtered, regulated process air Process air control kit (PACK) filters, controls and regulates air pressure proportional to production line speeds through the entire application range. Direct line speed signal control provides realtime response, improving control and pattern consistency of most non-contact hot melt adhesive spray applications. The regulation of process air pressure fluctuations caused by line speed changes improves nozzle performance and provides critical control of adhesive add-on for higher bond quality. Comprehensive filtration of particulate, oil and moisture provides reliable operation and longer service life. Filter assembly removes particulate, oil and moisture for reliable performance PACK design flexibility meets diverse production needs with two pressure range options (0 to 1.0 or 0 to 3.5 bar), and pressure controls for speed reference input signal using voltage or current. The unit’s compact size allows quick installation.

Process Air Control Kit Specifications Minimum Supply Pressure Maximum Supply Pressure Power Supply Input Signal Input Impedance Current type 250 W or less Output Signal Current type 4 to 20 mA (sink) Line Reference Cable Lengths (purchased separately) Maximum Flow Rate Particulate Filter 0.03 micron coalescing filter Water Separator For more information, speak with your Nordson representative or contact your Nordson regional office. AMG-EL 150 (99.9% moisture removal) Easy-to-use controls and detailed calibration instructions simplify setup. Nordson Corporation 11475 Lakefield Drive Duluth,...