*mydirectindustry

Catalogs
Nordson Adhesive Dispensing
DuraDrum ® Bulk Melters

DuraDrum ® Bulk Melters

Product catalog summary

Overview: Nordson DuraDrum® Bulk Melters are designed for the efficient application of hot melt adhesives, sealants, and butyls from 200-liter or 55-gallon drums. These melters are engineered to simplify daily operations and maintenance by melting only the top surface of the adhesive, preserving the integrity of the remaining material.

Key Features:

Manual pressure control and blow-off valves for simplified operation.
Graphical controls for easy programming and system status display.
Pressure control valve for precise, adjustable pressure.
Sturdy drum clamp for accurate positioning.
Single side access for controls and drum changes.
Dual hose/gun configuration compatible with standard Ni 120 Nordson hoses and guns.
Modular, non-stick melt platens for quick change and easy clean-up.

Specifications:

System Type: Gear pumps with preset fixed speed AC motor.
Drum Diameter: 571 mm (22.5 in) or 567 mm (22.3 in).
Maximum Pump Rate: 245 kg/hr (540 lb/hr).
Number of Hoses/Guns: 2 hydraulic and electrical, 4 additional electrical only.
Maximum Working Hydraulic Pressure: 100 bars/10 MPA (1500 psi).
Operating Temperature Range: 40 to 230°C (100 to 450°F).
Ambient Temperature Range: -5 to 40°C (23 to 104°F).
Temperature Control Stability: ±1°C (2°F).
Electrical Service: Various configurations including 200 VAC to 575 VAC, 3 phase, 50/60 Hz.
Maximum System Power Capacity: 33,100 watts.
Weight (empty): 675 kg (1488 lb).
Melter Dimensions: 1570 x 1830 x 740 mm (W x H x D).
Installation Dimensions: 2100 x 3010 x 1105 mm.
Protection: IP54.

Additional Features: The system includes eight additional temperature channels for controlling spray guns, heaters, etc.

Contact Information: For more information, contact Nordson representatives in the United States, Canada, Europe, Japan, or Asia/Australia.

Catalog excerpts

DuraDrum® Bulk Melters 200-liter or 55-gallon drum melters Nordson DuraDrum bulk melters are designed to provide simple, low-maintenance application of hot melt adhesives, sealants and butyls from 200-liter or 55-gallon drums. Many standard features, such as manual pressure control and blow-off valves, simplify daily operation and maintenance. DuraDrum bulk melters only melt the top surface of adhesive, allowing the remaining material in the drum to stay solid. DuraDrum melters: n Provide easy day-to-day operation n Offer production flexibility n Protect adhesive integrity Dual hose/gun configuration uses standard Ni 120 Nordson hoses and guns Easy-to-use graphical controls simplify programming and display system status Pressure control valve for accurate, adjustable pressure Single side access for controls and drum changes Sturdy drum clamp for accurate drum positioning

Open the catalog to page 1

DuraDrum® Bulk Melters Specifications Type of System Drum Diameter 2 (hydraulic and electrical) 4 additional (electrical only) Maximum Working Hydraulic Pressure Operating Temperature Range Ambient Temperature Range Temperature Control Stability Temperature Sensor 200 VAC 3 phase delta 50/60 Hz 240 VAC 3 phase delta 50/60 Hz 400 VAC 3 phase Y 50/60 Hz 400 VAC 3 phase delta 50/60 Hz 480 VAC 3 phase delta 50/60 Hz 575 VAC 3 phase delta 50/60 Hz Maximum System Power Capacity Input/Output Capability Standard 3 STD Outputs – programmable for function 4 STD Inputs – programmable for function Eight...

Open the catalog to page 2

All Nordson Adhesive Dispensing catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list