*mydirectindustry

DuraBlue L Series

Product catalog summary

Overview: The Nordson DuraBlue L Series melters are designed for hot melt adhesive applications, featuring fixed-speed AC motors and gerotor gear pumps. These melters are easy to operate and maintain, with a non-stick coated tube tank to minimize adhesive char.

Key Features:

Easy installation and operation.
Routine maintenance is simplified with large tank openings for easy filling and cleaning.
Status indicators provide a graphical display of the tank, hose, and gun status.
Controls are user-friendly, eliminating complex programming.

Specifications:

System Type: Tank with gerotor pump.
Maximum Pump Rate: 22, 35, or 50 kg per hour.
Number of Hoses/Guns: 2.
Filter Type: Saturn® basket-style filter.
Maximum Hydraulic Pressure: 75 bar (1100 psi).
Operating Temperature Range: 40 to 230°C (100 to 450°F).
Ambient Temperature Range: 0 to 50°C (32 to 122°F).
Temperature Control Stability: ±0.5°C (1°F).
Electrical Service: 120 VAC single phase 60 Hz or 200 to 240 VAC single phase 50/60 Hz.

Model Capacities:

DuraBlue 4 L: Holding capacity of 4 L, throughput of 6.3 kg per hour, melt rate of 4.7 kg per hour.
DuraBlue 10 L: Holding capacity of 10 L, throughput of 12.5 kg per hour, melt rate of 7.7 kg per hour.
DuraBlue 16 L: Holding capacity of 16 L, throughput of 20 kg per hour, melt rate of 11.2 kg per hour.

Power and Dimensions:

Maximum System Power Capacity: 2400 watts at 120 VAC, up to 4415 watts at 240 VAC.
Dimensions vary by model, with the largest being 441 mm in width, 649 mm in height, and 620 mm in depth.

Compliance and Contact Information:

240 VAC units are CE-compliant, and 120 VAC units are C-UL listed.
For more information, contact Nordson Corporation at their various regional offices.

Catalog excerpts

DuraBlue L Series Adhesive Melters 4, 10 and 16 liter melters DuraBlue melters: n P rovide easy day-to-day operation Simplify routine maintenance Status-at-a-glance indicators graphically display the status of the tank, hose and gun Nordson DuraBlue L Series melters feature fixed-speed AC motors with gerotor gear pumps for easy to operate, low-maintenance hot melt adhesive application. A non-stick coated, tube tank eliminates dead corners and minimizes adhesive char. Pump operation can be controlled by a handgun trigger or a foot switch. Easy-to-use controls eliminate complicated programming Easy access panels make maintenance quick and simple Large, accessible tank opening allows easier filling and cleaning

Open the catalog to page 1

Adhesive Melters For more information, speak with your Nordson representative or contact your Nordson regional office. Specifications Type of System Tank with gerotor pump Maximum Pump Rate1 (per hour) S aturn® basket-style filter United States Duluth, Georgia (800) 683-2314 Phone (866) 667-3329 Fax Maximum Working Hydraulic Pressure3 Operating Temperature Range Ambient Temperature Range Temperature Control Stability 120 VAC single phase 60 Hz 200 to 240 VAC single phase 50/60 Hz Quick plug-in hose/gun pairs Canada Markham, Ontario (800) 463-3200 Phone (905) 475-8821 Fax Europe Erkrath, Germany...

Open the catalog to page 2

All Nordson Adhesive Dispensing catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list