DuraBlue® L Adhesive Melter Systems 4 liter melter DuraBlue melter systems: n P rovide easy day-to-day operation Simplify routine maintenance A D-41 handgun (extrusion or swirl nozzle) DuraBlue melter systems provide everything needed to begin adhesive application immediately: melter, hose, gun and nozzle. The hose and gun arrive assembled as a single part. To begin using the DuraBlue melter system, simply connect the hose/gun assembly to the melter, mechanically and electrically, and supply power through the attached electrical cord. A choice of guns meets virtually any manual or semiautomatic manufacturing requirement. The gun choices provide for flexibility of triggering options, either hand or foot control. A selection of hose lengths provides additional adaptability to meet specific production needs. The DuraBlue melters feature fixed-speed AC motors with gerotor gear pumps and are easy to install, operate and maintain.

Adhesive Melter Systems For more information, speak with your Nordson representative or contact your Nordson regional office. Tank with gerotor pump Holding Capacity Melt Rate (per hour) Maximum Pump Rate (per hour)2 Maximum Working Hydraulic Pressure Operating Temperature Range Ambient Temperature Range Temperature Control Stability Electrical Service 120 VAC single phase 60 Hz, 200 to 240 VAC single phase 50/60 Hz Maximum System Power Capacity @120 VAC @240 VAC Approx. Melter Weight (empty)5 Melter Dimensions Width Height Depth United States Duluth, Georgia (800) 683-2314 Phone (866) 667-3329...