Catalogs >
Nordson Adhesive Dispensing >
Blue Series™ Hot Melt Adhesive Hoses

Blue Series™ Hot Melt Adhesive Hoses
2Pages

Catalog excerpts

Blue Series™ Hot Melt Adhesive Hoses - 1

Blue Series™ Hot Melt Adhesive Hoses with RediFlex™ II Mounting System Unique integrated hose hangers combine with tough, easy-to-use mounts to extend hose life and reduce downtime, frequency of replacement and parts costs Many hot melt hoses experience shortened service life due to squeezing, crushing and improper bending. Blue Series hoses feature patented, moveable RediFlex II hangers to improve routing and hanging, increasing hose life. Aramid insulation inside the hose maintains a consistent temperature, improving thermal efficiency and improving adhesive flow. Features • ntegrated hangers prevent damage and downtime caused by I compression and sharp bending • elps prevent premature failure by 60%, prolonging hose life H • asy slide-in installation enables quick hose changes, routing, E pairing and keeps hoses off of floors • inimizes char, hose and nozzle clogs due to above-temperature M adhesive • Improves temperature consistency of bundled hoses • elps prevent stringing caused by hose cool spots that can H reduce adhesive temperature • Routing provisions for solenoid cable and air tubing • Robust and durable for virtually any plant environment • lexible, 90° mounting capability offers optimal support of hoses F without danger of crushing with zip ties or over tight straps • mproves operator safety and helps prevent downtime due to I electrical failure • ake-first/break last electrical connections and separate, parallel M ground paths • Approved for water washdown environments • angers included on all hoses, screw-in mounts available H separately • Mounts and hangers made of Ryton® Polyphenylene Sulfide • IP-

Open the catalog to page 1

Blue Series™ Hot Melt Adhesive Hoses - 2

Blue Series™ Hot Melt Adhesive Hoses with RediFlex™ II Mounting system Nordson is committed to continuous improvement of our products. We invest in resources and technologies to bring you the latest innovation and improved performance and quality to minimize your downtime and maximize your productivity. Specifications Maximum Operating Temperature Maximum Hydraulic Pressure 1000 psi (6.89 MPa) for 5/8 and 1 1/8 in. (1.58 and 2.85 cm) diameter Electrical Service Available Lengths 2 to 65 ft (0.6 to 19.8 m) depending on diameter and voltage Length of hose in feet United States Duluth, Georgia...

Open the catalog to page 2