Allegro™ Elastic Attachment Nozzles
2Pages

{{requestButtons}}

Catalog excerpts

Allegro™ Elastic Attachment Nozzles - 1

Allegro™ Elastic Attachment Nozzles Advanced nozzle technology delivers precise adhesive fiber deposition for high-speed elastic attachment. Allegro elastic attachment nozzles: n Use novel air-assisted contact coating technology Facilitate increased production speeds Support close centers O ffer improved durability with easier maintenance and inspection Stabilize elastic strand position with integral guides Optimize adhesive placement Improve creep resistance Reduce adhesive variance O ffer durability through all-steel construction for extended service life Nordson® Allegro nozzles consistently apply a hot melt adhesive coating on the elastic strands used for elasticized features on baby diapers, training pants, and adult incontinence products. The patent-pending Allegro nozzle supports high-speed production lines, up to 650 meters per minute, while maintaining elastic centers as close as two millimeters. Production efficiency is enhanced with a robust design for nozzle durability and simplified cleaning and inspection. The Allegro nozzle uses an integral-strand guide to stabilize the elastic strand just prior to adhesive application and process air just after adhesive application to maintain performance at demanding production speeds. The process entails contact adhesive application to the top of the elastic strand and, while still molten, manipulation of the adhesive by the process air flow to form the adhesive around the entire strand for consistent, repeatable coating with exceptionally low variability. The process air also assists in cleanliness of cutoff of adhesive flow and in nozzle maintenance. Allegro nozzles in most common configurations are maintained in inventory for rapid delivery and may be made to order for other specific elastic configuration requirements. The nozzles are made of all-steel construction and use a proprietary coating to enhance durability and wear resistance. Allegro nozzles are compatible with UM22 and UM25 modules for mid-speed intermittent adhesive applications; Speed-Coat® modules for the most demanding highspeed intermittent lines; UM50 modules for continuous operation; high-speed, electric E-400U modules and UM3 modules for metering applications. Common Universal™ parts minimize inventory and simplify service. Special nozzle lengths up to 175 mm are available to support many-strand applicatio

Open the catalog to page 1
Allegro™ Elastic Attachment Nozzles - 2

Allegro™ Elastic Attachment Nozzles Specifications1 Module Compatibility Materials of Construction All-steel construction with proprietary coating Nozzle Orifice Sizes Nozzle to Substrate Distance Contact Adhesive Flow 2.5 to 25 grams per minute per orifice Add-on Weight Production Speed Capability Adhesive Viscosity 4,500 to 8,000 centipoise Operating Temperature Air Consumption 0.08 scfm per strand Air Pressure2 Working Hydraulic Pressure Maximum Hydraulic Pressure 89.6 bar (1300 psi) 1. 2. Values are typical and may vary based on specific adhesive and application. Process air (pressure...

Open the catalog to page 2

All Nordson Adhesive Dispensing catalogs and technical brochures

  1. Series AD-41

    2 Pages

  2. VersaDrum™

    2 Pages

  3. Its-a-wrap

    4 Pages

  4. LA 825 RC

    2 Pages

  5. H-20

    2 Pages

  6. TRIO

    2 Pages

  7. DWP series

    2 Pages

  8. Nozzle Catalog

    202 Pages

  9. SLL9042

    2 Pages

  10. SLL9023

    2 Pages

  11. SLL9028

    2 Pages

  12. CNL1228

    2 Pages

  13. CNL1837

    2 Pages

  14. pk961098

    2 Pages

  15. pk971297

    2 Pages

  16. GKL0058

    2 Pages

  17. GKL1142

    2 Pages

  18. VTL1730

    2 Pages

  19. VTL171

    2 Pages

  20. VTL110

    2 Pages

  21. JML1528

    2 Pages

  22. ASL2085

    2 Pages

  23. ASL2086

    2 Pages

  24. ELL1193a

    2 Pages

  25. UVL1818

    2 Pages

  26. NWL-11-5716

    2 Pages

  27. UM22 Module

    2 Pages

  28. NWL-11-5715

    2 Pages

Archived catalogs