Overview: The document describes the X-PRESS Nordic Conveyor System, a compact and cost-effective solution for transportation, washing, and dewatering of wet, stringy, and sticky materials. It is designed to be robust, flexible, and reliable, with a focus on handling varying flow volumes and types.

Specifications: The system is made from stainless steel, ensuring rust resistance and a fully enclosed, hygienic design. It can operate at up to a 45° inclination and features an extremely low inlet height. The design includes bolt-on supports and inlets, eliminating the need for welding, and bolt-on wear liners in PDHP1000.

Design Features: The X-PRESS system is a reinforced version of the X-CONVEYOR, featuring a compaction and dewatering head at the discharge end. It includes a washing system to clean solids from organics. The system uses a shaftless one-bearing spiral to convey wet solids into a press zone, which is a barrel-shaped basket made from wedge wire, optimal for dewatering.

Operation: As pressure increases, a plug forms at the discharge, squeezing free liquids through the basket to the drain. The discharge is controlled by back pressure inducing tension outlet doors, optimized by gas springs for maximum dewatering.

Applications: The X-PRESS system is suitable for various applications, including water screenings dewatering, grit dewatering, paper rejects dewatering, and industrial applications such as beet tails and vegetable waste dewatering.