AVENTUS ® Aventus is the Nordex’s solution for lighting highways, turn-offs, main streets, freeways and car parks. Aventus is created to answer to the aesthetical, mechanical and lighting needs of our customers. This elegant and innovative design can be used in a variety of urban landscapes and the two different models make it suitable for every kind of installation.

The cover can easily accommodate a Internal gaskets are made of antiageing, tropicalised and weather resistant silicon rubber so ensuring trouble free use. All hardwares are corrosion resistant stainless steel and the fastening clip is stainless steel to AISI 304. The reflector is made of hydro formed 0.90mm high purity aluminium (99.85%), electrically brightened, anodised and chemically treated giving an improved The socket housing is made of die-cast aluminium alloy. This socket can be adjusted for horizontal mounting with degrees of adjustment in between. This gives precise control over photometric...

The spigot fixing adapter is reversible and allows the adjustment of the lantern from 0° to +15° for vertical mounting and from 0° to -20° for horizontal mounting, both in steps of 5°. The spigot fixing is Ø 60 mm. Optic control in the photometric laboratory AVENTUS 1 ® Lamp replacement is easily achieved by releasing two lateral screws and rotating the lamp holder housing. The pre-wired control gear tray is also easily removed should this be necessary by loosening two finger tightened knobs.

Body, cover and spigot fixing: die-cast aluminium alloy powder coated in polyester powder (RAL 9007). Cover glass: Thermally toughened 4 mm. flat glass or curved glass. Socket: E27 or E40 for Aventus 1, E40 for Aventus 2. Electrical accessories: Galvanised pre-wired gear tray. Pole fixing: post-top (from 0° to +15°) and side entry (from 0° to -20°) suitable for Ø 60 mm spigots. Electrical insulation class: I Reflector: high purity aluminium (99.85%), electrically brightened, Protection degree: IP 66 anodised and chemically treated. Optic type: cut-off and semi cut-off. Fixings: stainless steel...

FLAT GLASS CURVED GLASS Curved glass Flat glass Tilt: Boom inclination UO: [Lmin/Lav] Overall uniformity FLAT GLASS CURVED GLASS Curved glass

Via della Meccanica, 29 04011 Aprilia - LT - Italy Tel. +39.06.92.81.666 Fax +39.06.92.81.243 http://www.nordexlighting.com E-mail: [email protected] The company is constantly developing and improving its products. All descriptions, illustrations, drawings and specifications in this publication present only general particulars and shall not form any part of any contract. The right is reserved to change specifications without prior notification or public announcement. All goods supplied by the company are supplied subject to the Company’s general Condition of Sale, a copy of which is available...