Product Specification 08/12/2021 EvoTorque 2 ET2-72-1000-110 NWR Approved Part number: 180230.B06.NWR EAN Bar Code: NATO number: Accuracy: ±3% Operates between: 100.00 - 1000.00 N·m 74.00 - 740.00 lbf·ft TECHNICAL SPECIFICATIONS 3/4" Square Drive 21 rpm Tool Weight of 10.4kg Calibrated to 20% - 100% of tool's maximum capacity Operational targets can be set from 10% of tool capacity FEATURES Each tool is supplied with a traceable calibration certificate Torque, Torque & Angle, Torque & Angle with Final Torque or Torque Audit Modes 'Usage' counter gives the ability to see the amount of times the tool has been used since the last reset "Operation Direction" designed primarily for undoing bolts. When doing sequence tightening, it is now possible to undo an incorrectly tightened bolt without interrupting the sequence 2 Stage Tightening gives faster application of a Snug Torque & Angle Target "Turn Angle" option can be used to check if bolts have already been tightened in an assembly process Allows tool integration into third party control systems Maximum Audit Mode target angle increased to 720 degrees Ability to produce and store real time graphs via EvoLog 2 different lock levels, lock level 1 as per previous lock, lock level 2 will not allow user to exit the run screen or change the target For more features please see link to sales leaflet under catalogue below

NORBAR TORQUE TOOLS LTD. Wildmere Road, Banbury, Oxfordshire, OX16 3JU, United Kingdom Registered Office as above - Registered in England No. 380480 - VAT No. GB 119 1060 05