SPECIAL TRAILERS SINCE 1881 EXTENDIBLE SEMI LOW LOADER WITH WHEEL WELLS

Nooteboom has expanded its SMART programme with the new OSDS-48-03V(EBW) extendible lightweight semi low loader with wheel wells. This 3-axle semi low loader with self-tracking axle has a payload of up to 39 tonnes at 80 km/h. By applying a new concept of this semi low loader with 4,750 mm extendable loading floor, a very low deadweight of only 8,700 kg has been achieved. From now on, due to the deep wheel wells, also larger types of wheel loaders and articulated dump trucks up to 39 tonnes can be transported with this semi low loader, where previously this was only possible with a low loader....

Your advantages with the OSDS-48-03V(EBW) Very low deadweight from approx. 8,700 kg • High payload up 39 tonnes at 80km/h Load floor 4,750 mm extendible Executed with self-tracking axle • Excellent manoeuvrability due to short axle distance between the • 1st and 2nd axle of only 2,260 mm Suitable for divisible and indivisible loads • Multifunctional use for the transport of wheel loaders, containers • and tracked construction machines • • Universal for all brands and types of wheel loaders and articulated dumpers • Wheel wells with 400 mm depth for very low transport height • Optimal weight distribution...

Gets you there. © Toolbox with side doors (optional) © Lashing eyes 13,400 daN (optional) © Extendible 0-4,750 mm © Cross ribs for extra grip © 35° slope for easy unloading © Wheel wells 400 mm deep © Lashing eyes 8,000daN © Hardwood between axles © Checker plate above tires © Holes for intermediate locks 20'/30'/40' © Lashing eyes 13,400 daN (optional) @ LED taillights @ Alu boards (optional) © Lashing eyes 5,000 daN © Stake pockets © Chamfered endings @ Sliding width enlargers © Lift axle (optional) © Lashing eyes 8,000 daN © Ferry rings (optional) © Self tracking axle © Lashing holes 30mm...

OSDS-48-03V(EBW) semi low loader with wheel wells 4

COMPLETE SPECIFICATION The OSDS-48-03V(EBW) semi low loader is exceptionally strong and has excellent torsional stiffness. The chassis has a long-lasting durable preservation and has a fully hot metal zinc spray. This increases the lifetime of the trailer and contributes to a higher residual value. The high quality is further reflected in the use of only top-quality A-brand components, as e.g. Jost landing legs, SAF axles, Hella lighting, Goodyear tyres and Wabco braking system. The semi low loader has complete standard equipment, including sliding outrigger consoles in the loading area, and...

ASYMMETRIC WHEEL WELLS The asymmetric shape of the wheel wells makes it easier to unload wheeled loaders from the wheel wells, for example. The special inclination angle of only 35 degrees of the 400 mm deep wheel well facilitates exit from a standstill. In addition, these easy access wheel wells are equipped with steel cross ribs that provide maximum grip when driving in and out. The position of the wheel wells also provides optimal weight distribution between the gooseneck and the axle bogie. The wheel well dimensions are suitable for all common brands and types of wheel loader with different...

EASY LOADING AND UNLOADING The long 1,150 mm rear beaver with high ground clearance makes loading and unloading machines extremely easy. For maximum grip, the loading floor is fitted with a hardwood floor wherever possible. For the loading and unloading of construction machines, the customer has a wide choice of ramps, ranging from 2.4-metre long aluminum ramps to automatically hydraulic folding 5-metre long ramps. For extra-wide machines, the hydraulic ramps and the standard sliding outrigger consoles can be extended to over 3 metres. In the case of aluminum ramps, they can be hooked up to a...

LOADED WITH A STANDARD ISO 20-FEET CONTAINER LOADED WITH A LIEBHERR R-926 CRAWLER EXCAVATOR MULTIFUNCTIONAL The semi low loader is very multifunctional. It is not only limited to the transport of wheel loaders and dumpers, but also divisible loads, containers and tracked construction machines. If necessary, the wheel wells can easily be closed, creating a completely flat loading floor. For this purpose, removable galvanised supports with integrated sliding width enlargers and hardwood floor boards are available. As an option, the wheel wells can also be completely filled with hardwood parts....

LOADED WITH A VOLVO A30D ARTICULATED HAULIER LOADED WITH A CATERPILLAR 972K WHEEL LOADER LOADED WITH A VOLVO L120 WHEEL LOADER LOADED WITH A LIEBHERR L 580 WHEEL LOADER LOADED WITH A HITACHI ZW310 WHEEL LOADER LOADED WITH A 40-FEET FLATRACK

The brochure has been compiled with the utmost care, but no rights may be derived from any content that is incomplete or incorrect. Nieuweweg 190, 6603 BV Wijchen, The Netherlands Tel. +31 24 6488864, E-mail [email protected] www.nooteboom.com