STEPPER MOTORS, DRIVES, & POWER SUPPLIES 1st Edition

LINEAR MOTION SOLUTIONS Nook Industries, Inc. offers motion control components that become the tools that complete actuator system solutions. The elements that make up a linear solution are motors, drives, and power supplies. Stepper motors can power ball screws, actuators, jacks, and linear modules. Nook delivers best-in-class components consistent with Nook quality and performance at the lowest cost, all from a single source. SERIES 500 The Series 500 product line of actuators (both parallel mount and in-line mount) are designed with the appropriate-sized Nook stepper motor and optional drive...

AUTOMATION TECHNOLOGY & CONTROL LINEAR MOTION SOLUTIONS INTEGRATED STEPPER INTEGRATED STEP-SERV MOTOR/DRIVE/ENCODER This new integrated stepper system is a compact, cost effective drive-plus-motor-with-feedback package. The 2-phase NEMA 23 step motor is integrated with an advanced DSP stepper drive and a magnetic encoder to save you space, time and money. Competitive products are called "easy" servo or "hybrid" servo, Nook offers this step motor/drive with feedback which we describe as Step-Serv. Bonus: servo-tuning is not necessary, and a stepper does not "hunt"at rest like a conventional servo....

PowerPlus technology: boosts efficiency and performance at all speeds Lower inertia rotors provide faster acceleration High voltage insulation for use with high voltage, high performance drives Low loss stators have better high speed performance Standard windings with high fill for more low speed torque Holding Torque (oz-in) NEMA 17 MOTOR W/ NM-4022 DRIVE POWER SUPPLY: 24VDC (RPS-369) CURRENT: 1.6A RMS Torque (oz-in) NEMA 17 MOTOR W/ NM-5045 DRIVE POWER SUPPLY: 36VDC (RPS-369) CURRENT: 2.0A RMS NEMA 17 MOTOR W/ NM-5045 DRIVE POWER SUPPLY: 24VDC (RPS-2410) CURRENT: 2.0A RMS Torque (oz-in) NEMA...

AUTOMATION TECHNOLOGY & CONTROL LINEAR MOTION SOLUTIONS PowerPlus technology: boosts efficiency and performance at all speeds Lower inertia rotors provide faster acceleration High voltage insulation for use with high voltage, high performance drives Low loss stators have better high speed performance Standard windings with high fill for more low speed torque NEMA 23 MOTOR W/ NM-5045 DRIVE POWER SUPPLY: 36VDC (RPS-369) CURRENT: 2.2A RMS RPM NEMA 23 MOTOR W/ NM-5045 DRIVE POWER SUPPLY: 48VDC (RPS488) CURRENT: 2.2A RMS NEMA 23 MOTOR W/ NM-8078 DRIVE POWER SUPPLY: 24VDC (RPS2410) CURRENT: 5A RMS...

PowerPlus technology: boosts efficiency and performance at all speeds Lower inertia rotors provide faster acceleration High voltage insulation for use with high voltage, high performance drives Low loss stators have better high speed performance Standard windings with high fill for more low speed torque Holding Torque (oz-in) NEMA 34 MOTOR W/ NM-8078 DRIVE POWER SUPPLY: 48VDC (RPS488) CURRENT: 5.5A RMS 8-LEAD PARALLEL NEMA 34 MOTOR W/ NM-8078 DRIVE POWER SUPPLY: 60VDC (RPS608) CURRENT: 5.5A RMS 8-LEAD PARALLEL NEMA 34 MOTOR W/ NM-12082-AC DRIVE POWER SUPPLY: 120VAC CURRENT: 2A RMS 8-LEAD SERIES...

AUTOMATION TECHNOLOGY & CONTROL LINEAR MOTION SOLUTIONS CURRENT SETTING INTRODUCTION The NM-4022 is a versatile, fully digital stepping drive based on a DSP with an advanced control algorithm. It brings a unique level of system smoothness, provides optimum torque, and nulls midrange instability. Motor auto-identification and parameter autoconfiguration technology offers optimum response with different motors. The NM-4022 allows step motors to run with much lower noise and heat while still creating smoother motion than other stepping drives on the market. Output current is programmable in software...

CURRENT SETTING INTRODUCTION The NM-5045 is a high performance 2-phase digital stepper drive that utilizes an advanced DSP and current control algorithm. The drive will accept step & direction and/or CW/CCW control commands and is simple to implement. Output current is programmable in software configured mode from 0.5A to 4.5A. When not in software configured mode, operating current is set by SW 1,2,3 of the DIP switch. DIP switch current settings range from 1.4A to 4.5A. Select a current setting closest to your motor’s required current MOTORS The NM-5045 stepper drive can automatically identify...

AUTOMATION TECHNOLOGY & CONTROL LINEAR MOTION SOLUTIONS NM-8078 CURRENT SETTING Output current is programmable. When not in software configured mode, operating current is set by SW1,2,3 of the DIP switch. Up to 2.2A. Select a current setting closest to your motor’s required current. Like the smaller Nook drives the NM-8078 also uses an advanced DSP and current control algorithm. This is a higher power high performance 2-phase digital stepper drive. The NM-8078 will take step & direction and/or CW/CCW control commands, and is very simple to implement. APPLICATIONS The NM-8078 stepper drive can...

INTRODUCTION The NM-12082-AC is a high voltage, digital stepping drive based on a DSP with advanced control algorithm. It brings a unique level of system smoothness, providing optimum torque and nulls midrange instability. Motor auto-test and parameter auto-configuration technology offers optimum responses with different motors and is easy-to-use. The driven motors can run with much less noise, lower heating, smoother movement than most of the drivers on the market. Its unique features make the NM-12082-AC an ideal solution for applications that require low-speed smoothness. The NM-12082AC will...

AUTOMATION TECHNOLOGY & CONTROL LINEAR MOTION SOLUTIONS POWER SUPPLIES • Specifically designed to power stepper and servo systems High efficiency and output power up to 500W Input voltage of 85-132 and / or 176-265 AC Output voltage of 24/36/48/60 VDC Quick response to constant current changes Able to take voltage charge back in stepper/ servo systems Short circuit, over-current, over-voltage and short-voltage protection POWER INPUT 6-4.5 × 3.5 Ellipse through hole PRECISION METRIC BALL SCREWS (PMBS™) Nook Industries has always been a leader in developing high-quality linear motion components...