Modular Rack Mount Hardened Layer 2 Switch TRANSITIONNETWORKS« Features • IEC 62439-2 MRP Media Redundancy Protocol • IEEE 1588v2 PTP clock Synchronization • IPv4/IPv6 internet protocols • 8K MAC Table • HTTPS/SSH network security • SMTP client • IP-based bandwidth management • Application-based QoS management • Device Binding security function • DOS/DDOS auto prevention • IGMP v2/v3 IGMP snooping • SNMP v1/v2c/v3 • RMON • 4096 VLANs Network Management • VLAN tagging (256 VLANS) • Voice VLAN • User Authentication for security • RADIUS/TACACS+ • GRE Support • ACL • Supports 9.6K Bytes Jumbo Frames • LLDP Protocol • G.8032 V2 • MRP - Multiple Registration Protocol • VRRP Virtual Router Redundancy Protocol • LACP - 14 Groups • MSTP (RSTP/STP compatible) • TOS/DiffServ supported • IGMP v2/v3 Snooping -128 Groups/VLAN • IP-based bandwidth management • DHCP Server/Client/Relay • DNS client proxy • Web-based, Telnet, Console (CLI) configuration Note: Layer 2 switch is NOT upgradeable to Layer 3 IEC61850-3 compliant managed Ethernet switch with complete support of MRP Ethernet Redundancy protocol and MSTP (RSTP/STP compatible), the switch can protect your mission-critical applications from network interruptions with its fast recovery technology. Supporting a wide operating temperature from -40°C to +65°C, the switch is suitable for use in challenging environments. Remote management can be accomplished through the web-based interface and Telnet, with local management available using the console port CLI. Modular design features: 3 Full size bays that accommodate (8) port 100/1000Base modules, 1 Half size bay that accommodates (2) or (4) port 1000/10Gb SFP modules, and 2 Power supply bays. Specifications Standards Ordering Information SISGM-CHAS-L2 3 Full size bays - accommodates (8) port 100/1000Base modules 1 Half size bay - accommodates (2) or (4) port 1000/10Gb SFP module 2 Power supply bays Optional Accessories (sold separately) Power Supplies SISGM-PWR-LVC 1 Power module, with cooling fans, supporting 24~72VDC SISGM-PWR-HVC 1 Power module, with cooling fans, supporting 100 ~ 240VAC or 100 ~ 370VDC Network Port Modules Port Configurations 3 Full size (8) Port Bays 1 Half size (2/4) Port Bay 2 Power Supply Bays (1) RJ-45 Console Serial Port Network Redundancy O-Ring, Open-Ring, Multi-Ring, MRP - Media Redundancy Protocol, MSTP (RSTP, STP Compatible) Depth: 12.8” [325 mm] Height: 1.73” [44 mm ] 19" Rack Mountable, 1U Requires 1U open space above and below for cooling Power Consumption 46 Watts (max) Power Input (Redundant) VDC 48 (24 ~ 72VDC) Dual Inputs VAC 100~240VAC/100~370VAC Dual Inputs Current Overload Protection Fault Output Fault Relay 1A@24VDC Environment Operating with Extended Temperature 1G or 10G SFPs: -40°Cto +55°C Operating with Extended Temperature 1G SFPs only: -40°Cto +65°C Humidity: 5% to 95% (non-condensing) Substation Automation IEC61850-3, IEEE1613 Compliance EMI: FCC Part 15' CISPR (EN 55022) Class A, SISGM-2P-10G-SFP (2) Port Dual Speed 1000/10G SFP Module Installs in Chassis Half Size Bay (1 per Chassis) SISGM-4P-10G-SFP (4) Port Dual Speed 1000/10G SFP Module Installs in Chassis Half Size Bay (1 per Chassis) SISGM-8P-1G-TX (8) Port 10/100/1000Base-TX RJ-45 Module Installs in Chassis Full Size Bay (3 per Chassis) SISGM-8P-1G-SFP (8) Port 100/1000Base-X SFP Module Installs in Chassis Full Size Bay (3 per Chassis) Note: Product is shipped as separate modules allowing assembly and configuration during installation. Transition Netw