• Standards: IEEE 802.3-2012
• Bus Slot: M.2 - ‘2230-D4-A-E’
• Data Rate: 100 Mbps (full duplex only)
• Max Frame Size: 9014 bytes
• Status LEDs: LINK/ACT (ON = Link, Flashing = Activity)
• Dimensions:
  • M.2 NIC: Width: 0.87” [22 mm], Depth: 1.18” [30 mm], Height: 0.12” [3.08 mm]
  • Fiber Interface: Width: 1.65” [42 mm], Depth: 2.05” [52 mm], Height: 0.51” [13 mm]
  • FFC Cable: Length: 2.99” [76 mm]
• Software Support: Windows 10, 8, 8.1, and 7 (32/64 bit); Linux
• Power Consumption: 120mA @ 3.3V (0.4 Watts typical not including SFP module)
• Power Consumption (SFP): 330mA @ 3.3V (1 Watt typical)
• Power Source: M.2 interface connector: 3.3V
• Environment: Operating: 0°C to +45°C, Storage: -40°C to 85°C, Humidity: 5% to 95% (non-condensing), Altitude: 0 – 10,000 ft.
• Weight: 0.1 lbs. [0.05 kg]
• Compliance: CE Mark; Emissions: EN55032, FCC Part 15 Class A; Immunity: EN55024
• Warranty: Lifetime

The Transition Networks M.2 Fast Ethernet Fiber Network Interface Card (NIC) provides a fiber optic interface for the Dell OptiPlex™ 7040 and 7050 Micro PC. The NM2-FXS-2230-SFP-01 includes a M.2 NIC that installs into the OptiPlex Micro PC’s M.2 “E key” interface, a fiber optic adapter for the Option port, and a 20-pin Flat Flex Cable (FFC) connecting the NIC to the fiber adapter. The fiber optic adapter is an open SFP with a 100Base-FX to SGMII SFP Module.

• PCI Express M.2 compliant
• A + E keyed M.2 interface
• Full duplex
• IPv6 Capable
• Supports PXE boot
• Jumbo frame support 9014 bytes
• 100Base-FX to SGMII SFP interface

NM2-FXS-2230-SFP-01: M.2 NIC, 100Base-FX to SGMII SFP media converter (included)