see also: Ethernet 10BASE Point System™ Slide-In-Modules stand-alone media converter Ethernet Copper to Fiber Media Converter Extend Network Distance Ordering Information (2) 10BASE-T to 10BASE-FL Media Converters used back-to-back extend the distance between (2) 10BASET devices up to 5 km (3.1 mi.) using multimode fiber or up to 40 km (24.9 mi.) using single mode fiber without a repeater. Connect Unlike Devices environments using either switched or shared Ethernet Connect your workgroup to a distant server or a central switch; or extend distances between like and unlike devices in either full or half-duplex modes. Features 4Link Pass Through 4Automatic Link Restoration Optional Accessories (sold separately) S1: Enables/disables Link Pass Through Status LEDs PWR (Power): ON = connection to external AC power Link: ON = unit is receiving link pulses from a compliant device RX (Receive): ON = packets are being received Dimensions Width: 3.0” [76 mm] Depth: 3.9” [99 mm] Height: 1.0” [25 mm] Power External AC/DC required; 12 VDC, 0.5A, unregulated, standard Wide Input (24 - 60 VDC) Power Supplies SPS-2460-SA Stand-Alone Power Supply Mounting Options E-MCR-05 12-Slot Media Converter Rack RMS19-SA4-01 4-Slot Media Converter Shelf WMBD DIN Rail Bracket 5.0” [127 mm] Shipping Weight WMBD-FS DIN Rail Bracket (flat, small) 3.1” [79 mm] Safety Compliance Wall Mount Power Supply: UL Listed, C-UL Listed (Canada) WMBS Wall Mount Bracket 3.2” [81 mm] Regulatory Compliance FCC Class A, CISPR22/EN55022 Class A, EN55024, EN61000, CE Mark Warranty WMBV Vertical Wall Mount Bracket 5.0” [127 mm] Up to 5 km multimode fiber or 40 km single mode fiber Standards Switch