TRANSITION NETWORKS. Multiport media converters provide copper to fiber conversion as well as fiber to fiber conversion. These converters can operate as 3 port switches or as a 2 port devices with fault tolerant fiber redundancy, while supporting a variety of Ethernet network speeds and various cabling medium. Applications include: extend network distance, bridge legacy 10/100 devices to a Gigabit backbone, and protect critical networks with fiber redundancy. Ordering Information CGFEB1040-140 10/100/1000Base-T (RJ-45) [100 m/328 ft.] to (2) 1000Base-X SFP Slots (empty) CGFEB4040-180 100/1000Base-X SFP Slot (empty) to (2) 1000Base-X SFP Slots (empty) Optional Accessories (sold separately) Features • Auto-Negotiation (copper and fiber ports) • Switch Selectable Speeds (UTP) when Auto-Negotiation is off • Auto-MDI/MDIX • Far-End-Fault (FEF) (100Base-FX setting on port 1 only) CGFEB1040-140 only • Automatic Link Restoration • Fiber Redundancy (<50ms switching time) • IEEE 802.1P QoS, IPv4 Tos/DiffServ, IPv6 traffic class • IEEE 802.1q VLAN tagging and double tagging (Q in Q) • Field Upgradeable Firmware • Virtual Cable Test (VCT) on UTP port CGFEB1040-140 only • Bandwidth Allocation • SGMII support on port 1 for use with 10/100/1000Base-T copper SFPs FEB1040-180 only • 100/1000Base-X, dual speed support on port 1 for use with 100Base-FX or 1000Base-SX/LX, SFPs (CGFEB1040-180 only) • DMI, Digital diagnostics per SFF-8472 • RMON Counters for each port Specifications Standards IEEE 802.3 SFP (port 1): 100/1000 Mbps (-180 model only) SFP (port 2,3): 1000 Mbps Filtering Addresses 8K MAC Addresses Max Frame Size 802.3ac tagged: 1628 bytes Untagged: 1632 bytes Dip Switches Switch 1: TX - Enable/Disable Auto-Negotiation Switch 2: TX - Force 10 Mbps or 100 Mbps with Switch 1 off Switch 3: TX - Force Half or Full duplex with Switch 1 off Switch 4: Enable/Disable Fiber Redundancy port (2/3) IEEE 5: Enable/Disable primary/secondary revert with Switch 4 on IEEE 6: Enable/Disable P2 to P3 blocking Dip Switches Switch 1: Port 1 speed 100 Mbps/1000 Mbps IEEE 2: Port 1 duplex full/half IEEE 3: Port 1 mode 1000Base-X/SGMII IEEE 4: Enable/Disable Fiber Redundancy (port 2/3) IEEE 5: Enable/Disable primary/secondary revert with Switch 4 on IEEE 6: Enable/Disable P2 to P3 blocking Status LEDs PWR: ON green = Power applied to card TP (Duplex/Link/Activity): Orange: ON = Half-duplex Link; BLINK = Activity; Green: ON = Full-duplex Link; BLINK = Activity TP (10 Mbps/100 Mbps/1000 Mbps): Off = 10 Mbs; Orange = 100 Mbs; Green = 1000 Mbs LACT (Fiber SFP Link/Activity): Green: ON = Link; BLINK = Activity Dimensions Width: 0.86” [22 mm] Depth: 5" [127 mm] Height: 3.4” [86 mm] Power Consumption 6 Watts Weight Compliance Warranty Environment specs are dependent on the chassis chosen Operating: 0°C to 50°C Humidity: 5% to 95% (non-condensing) Altitude: 0 - 10,000 ft. 1 lb. [0.45 kg] CISPR/EN55022 Class A, EN55024, EN61000, FCC Class A, CE Mark Lifetime Transition Networks • Media Converters, Extenders, & NIDs Catalog | 33