Ethernet Copper to Fiber Media Converter Ordering Information: Class A CETTF1011-105 10BASE-T (RJ-45) [100 m/328 ft.] to 10BASE-FL 850nm MM (ST) [2 km/1.2 mi.] Link Budget: 13.5 dB CETTF1013-105 10BASE-T (RJ-45) [100 m/328 ft.] to 10BASE-FL 850nm MM (SC) [2 km/1.2 mi.] Link Budget: 13.5 dB Link Pass Through Automatic Link Restoration Can be used with any Point System™ Chassis Integrate mixed cabling environments in either switched or shared Ethernet networks. Field Upgradeable Firmware Extend Network Distance Two 10BASE-T to 10BASE-FL Media Converters used back-to-back extend the distance between two 10BASE-T devices up to 5 km (3.1 mi.) using multimode fiber, up to 20 km (24.9 mi.) using single mode fiber without a repeater. Connect Unlike Devices Connect your workgroup to a distant server or a central switch; or extend distances between like and unlike devices in either full or half-duplex modes. FCC & CISPR Class A devices comply with radiated emissions standards for commercial applications in the United States (FCC Class A) and Europe (CISPR Class A). Connect legacy 10BASE-T devices to a fiber based cabling infrastructure. Single Fiber Products CETTF1029-105 10BASE-T (RJ-45) [100 m/328 ft.] to 10BASE-FL 1310nm TX/1550nm RX single fiber SM (SC) [20 km/12.4 mi.] Link Budget: 19.0 dB CETTF1029-106 10BASE-T (RJ-45) [100 m/328 ft.] to 10BASE-FL 1550nm TX/1310nm RX single fiber SM (SC) [20 km/12.4 mi.] Link Budget: 19.0 dB ­ Specifications Standards Fiber Port: Enables/disables network traffic on the fiber port; (Up = enabled) Copper Port: Enables/disables network traffic on the copper port; (Up = enabled) AutoCross™: Enables/disables AutoCross™ function; (Up = enabled) Link Pass Through: Enables/disables Link Pass Through function; (Up = enabled) Hardware: Converter mode is determined by 4-position switch settings Software: Converter mode is determined by most recently saved on-board microprocessor setting Status LEDs PWR (Power): On for normal operation; LKF (Link Fiber): Steady LED indicates good fiber link and normal operation; RXF (Receive Fiber): Flashing LED indicates data reception on fiber link; LKC (Link Copper): Steady LED indicates good copper link and normal operation; RXC (Receive Copper): Flashing LED indicates data reception on copper link Dimensions Width: 0.86” [22 mm] Depth: 5.0” [127 mm] Height: 3.4” [86 mm] Power Consumption Shipping Weight Regulatory Compliance Warranty Lifetime Transition Networks, inc. +1.952.941.7600 [email protected] www.transition.com ,