C4110 Series
1Pages

TRANSITION NETWORKS. The C4110 is a 10Gbps protocol independent media converter with two pluggable SFP+ ports. Each port can support data rates from 1Gbps up to 11.5Gbps allowing network designers to customize the C4110 with a pair of SFP modules from Transition Networks' wide SFP product offering, to meet their network requirements. The C4110 can be used as an any-rate to similar-rate fiber mode converter, as well as a WDM transponder. Management of the card is available through the IONMM when installed in an ION Chassis. Ordering Information C4110-4848 1 Gbps to 11.5Gbps fiber repeater with two open SFP+ slots, any rate to same rate ION slide-in card media converter Optional Accessories (sold separately) SFP or SFP+ Modules Features • ION chassis Card • Fiber to fiber repeater • Remotely Managed when installed in a Managed ION Chassis • Supports data rates from 1Gbps to 11.5Gbps • Support Any-rate to Same-rate • Protocol Transparent supports: - Ethernet: 10Gig LAN, 10Gig Wan, 1Gig LAN - Fiber Channel: 10, 8, 4, 2, 1Gig - SONET/SDN OC-192, OC-48 • SFP to SFP or SFP+ to SFP+ • Provides conversion between different types of fiber • Supported transmission distance based on the SFP modules and type of fiber used • Supports 3R (Reamplify, Reshape, and Retime) signal regeneration • No frame size limitations • Use as a fiber mode converter • Use as a specific wavelength CWDM Transponder • Also available as a stand-alone converter Specifications Standards Data Rate Dip Switches Power Consumption IEEE 802.3ae ITU.G.709 SFF8431 Multi-sourcing Agreement (MSA) Small Form Factor Pluggable (SFP) PWR: On = Power Port 1 Link/Act: On = Link, Flashing = Network Traffic Port 2 Link/Act: On = Link, Flashing = Network Traffic Protocol Independent, 1Gbps to 11.5Gbps Only 4 of the 8 Dip Switches are used to select the operational data rate, see the user guide for the supported dip switch configurations Width: 0.86” [22 mm] Depth: 6.5” [165 mm] Height: 3.4” [86 mm] 4.2 Watts Environment Environment specs are dependent on the chassis chosen Operating: 0°C to 50°C Humidity: 5% to 95% (non-condensing) Altitude: 0 - 10,000 ft. MTBF Greater than 250,000 hours (MIL-HDBK-217F) Greater than 687,000 hours (Bellcore) Compliance FCC Class A, CE Mark, EN55022 Class A, EN55024 Warranty Lifetime Transition Networks • Media Converters, Extenders, & NIDs Catalog | 19