evoControl' • Multifunctional hotrunner process control and diagnosis device from 4 up to 32 zones • Comfortable, easy to understand touch-screen operation • Precise temperature control with all necessary hotrunner and diagnosis functions • Remote control via WiFi • Interface to injection moulding machine OPC-UA, TTY as an option • NEW: Cloud connection with CLARA and NOAH Available options : • Mould cooling monitoring • Integrated mould cavity pressure monitoring All needed functions for a precise temperature control and process monitoring of hotrunner injection moulds in one device: Temperature control and complete mould diagnosis functions come standard, optionally with integrated valve gate control. Control and operation of your cooling unit also available. Cloud connection with automatic intermediate data buffering CLARA standard, ready for NOLDEN cloud portal NOAH for process data archive and retrieving. Existing devices can be upgraded at any time. All units are usable regardless to the mould manufacturer. Controll computer, signal processing electronics and heating power supply all combined in one rugged metal casing, 2 sizes for different numbers of zones. Load-fuses are mounted on the side and thus provide an easy access in case of failure. Touchscreen for comfortable and simple control and operation of all zones. Temperature control Adaptive, process computer based temperature controll with automatic adaptation to the controlled system assures very precise temperature control for quick hot-tips as well as for slow manifold heaters. Many control parameters can be set-up specificly, this makes the controller an ideal unit for complex and difficult moulds. The bright, large touch-screen permits an easy, quick overview on all important functions and control parameters. On request, it shows all zones together, groups of zones or every zone in detail. In any situation, only relevant NOLDEN REGELSYSTEME GMBH All rights reserved / version : 10/2023

Touchscreen hotrunnercontroller NR8000-v3 information is shown to avoid a cluttered screen overload. Touchscreen operation is almost identical with the bigger systems up to 144 zones, so that operators can transition easily between them. Specific hotrunner functions Beside the very precise temperature control of every zone, numerous hotrunner program functions can be chosen, for all zones together or for every single zone as appropriate. The most important ones are : Soft-start During soft-start, the controller unit works with reduced temperature and power setting (factory-defaults: 50% / 80°C...

Touchscreen hotrunnercontroller NR8000-v3Interface to IMMStandard with OPC-UA interface to injection moulding machines or other process control! servers, protocol according to EUROMAP 82.2 . Alternatively, the proven TTY-interface 20mA available as an option, eg. to Arburg IMM.Examples touch-screen NOLDEN SmartTouchSystem STS 71 Deutsch REGLER Choose main functions in the “Homescreen Most important screen for operation : Overview all zones NOLDEN REGELSYSTEME GMBH All rights reserved / version : 10/2023

17,25kW / 3 x 25A total (depending on the total number of zones) Heating load per zone Max. 3,6kW/16A 0 - 100% proportional, zero-voltage switching (factory default settings) Power-setting 50% / temperature 80°C / time 5 min Sensitive (projected capacitive) 7” or 10” touchscreen with pollution-resistant glass-surface, displays actual values and set-points, load-current, alarms, mould memory and configuration parameters. 2 floating relay contacts for alarms, max. 230V, 3A, floating input for external stand-by, works on all zones together, wired in parallel with internal „Stand-by“-key on the front...