Solid state relay flat standard type

Product catalog summary

Overview: This datasheet provides technical specifications for solid state relays manufactured by Nolden Regelsysteme GmbH. These relays are designed for use with temperature controllers and are optimized for controlling Ohm resistive loads in heating applications. Proper mounting on a heat sink is required, and some models include a cover.

Specifications:

1 Phase Design: Available models include HR 142, HR 162, HR 165, and HR 167, with nominal currents ranging from 25A to 75A and voltage ranges from 12-600V AC. The I²t values range from 288A²s to 5000A²s, with Upeak values from 600Vp to 1200Vp.
3 Phase Design: Models HR 362, HR 365, and HR 367 offer nominal currents from 25A to 75A, voltage ranges from 24-600V AC, and I²t values from 265A²s to 5000A²s, with a Upeak of 1200Vp.

Complete Unit with Heat Sink: These units are assembled on a heat sink and include a clamp for rail mounting, suitable for replacing mechanical relays. Dimensions for 1 phase units are 45 x 93 x 80mm, and for 3 phase units, 112 x 124 x 100mm.

1 Phase Complete Units: Models HRK 162, HRK 165, and HRK 167 offer currents from 16A to 32A, voltage ranges from 24-600V AC, and I²t values from 288A²s to 5000A²s, with Upeak values from 800Vp to 1200Vp.

3 Phase Complete Units: Models HRK 362, HRK 365, and HRK 367 provide currents from 16A to 32A, voltage ranges from 24-600V AC, and I²t values from 265A²s to 5000A²s, with a Upeak of 1200Vp.

Catalog excerpts

Solid state relay flat standard type Solid state relay • • • • Driven by temperature controller with SSR-output Optimized for control of Ohm resistive loads for heating Mounting on heat sink of sufficient size required ! Including cover (depending on model) NOLDEN REGELSYSTEME GMBH Gewerbegebiet Am Tonschuppen 2 Tel.: 0049-228-644856 53347 Alfter-Volmershoven Fax: 0049-228-640309 E-Mail: [email protected] Internet: www.nolden-regler

Open the catalog to page 1

Solid state relay complete unit with heat sink Solid state relay • • • • Driven by temperature controller with SSR-output Complete unit assembled on heatsink (@45°C) and clamp for rail mounting For replacement of mechanical relays Including cover (depending on model) Design 1 phase Dimensions (w/o cover and rail clamp): 45 x 93 x 80mm (W x H x D) Design 3 phase Dimensions (w/o rail clamp): 112 x 124 x 100mm (W x H x D) NOLDEN REGELSYSTEME GMBH Gewerbegebiet Am Tonschuppen 2 Tel.: 0049-228-644856 53347 Alfter-Volmershoven Fax: 0049-228-640309 E-Mail: [email protected] Internet: www.nolden-regler.de...

Open the catalog to page 2

Solid state relay flat standard type

Solid state relay flat standard type

Catalog excerpts

All Nolden Regelsysteme GmbH catalogs and technical brochures