DIN Temperature controller NOL-DEN 96x96 multi zone NT 2400__ 4-, 6-, 8-zone-temperature controller • Microprocessor multi zone controller with LED-Display • Optimized for use in the plastic moulding industry • Clearly arranged overview of all relevant parameters : All in one sight • Automatic self-tuning - adapts to different controlled systems • Graphical tracing-function for the actual parameters Application This temperature controller unit was specially designed to fit the demands of the plastic moulding industry. It comes up with a clear design and provides easy operation, good overview on all zones and various self-monitoring features. The controller is mainly used for hot-runners, but also for extruders and presses. Multi zone controller (4, 6, 8 zones) in norm format 96 x 96mm for cabinet front panel integration. Closed loop control Microprocessor-controller with automatic self-tuning: Automatically determines the characteristics of each heating-zone and adapts the control-parameters accordingly. Easily understandable operation panel in German or English with menus and soft-keys. Simple programmation of the controller by different menu levels, easy and safe. Alarm output Each heating zone provides 2 separated alarm functions, which are wired to 2 floating contacts and operate as a common alarm output. One alarm is pre-defined as process-high- and one as cable-breakage-warning. Graphic tracing-function For every zone, the development of the real values can be indicated. Safeguard in case of sensor-breakage Sensor-breakage is signalled at the zones corresponding display. The concerned zone switches-over to manual power-control and takes over the last assigned value, which may be adjusted manually. Manual power-control Each heating zone may be changed to manual power control even if the sensor is working. NOLDEN REGELSYSTEME GMBH All rights reserved Revision: 11/2010 Gewerbegebiet Am Tonschuppen 2 Tel.: 0049-228-644856 E-Mail: [email protected] 53347 Alfter-Volmershoven Fax: 0049-228-640309 Internet: www.nolden-regler.de

DIN Temperature controller 96x96 multi zone NT 2400 Limitation of desired temperature value To prevent misuse or faulty entries, minimum- as well as maximum- temperature-values can be programmed. Automatic self-tunig The controller starts-up (if desired) with a soft-start to preserve cold heating elements. Time, power-setting and temperature during this phase are variable and can be set-up for every zone as needed. Analysis of characteristics of the controlled systems at start-up, can also be triggered manually during operation. Picture: Detailled info per zone (effective control parameters)...