NOLDEN Single-zone-temperature controller • Microprocessor single zone controller with LED-Display • Optimized for use in the plastic moulding industry • Automatic self-tuning - adapts to different controlled systems This temperature controller unit was specially designed to fit the demands of the plastic moulding industry. It comes up with a clear design and provides easy operation and various selfmonitoring features. The controller is used for hot-runners, extruders and presses. Single zone controller in norm-format 96 x 96mm for cabinet front panel integration. Microprocessor-controller with automatic self-tuning establishes best control-results for fast nozzles as well as for slow manifolds or extruders. In the case of a sensor-breakage, the controller switches over to manual power-control and effects the last used power set-point. Depending on the configuration, two alarm contacts are available : 2 Alarm contacts available 1 Alarm contact available The function of the alarms can be set-up in the menu. NOLDEN REGELSYSTEME GMBH All rights reserved Revision: 11/2010 Gewerbegebiet Am Tonschuppen 2 Tel.: 0049-228-644856 E-Mail: [email protected] 53347 Alfter-Volmershoven Fax: 0049-228-640309 Internet: www.nolden-regler.de

NOLDEN Example for the wiring : Mains voltage Control output 18V DC, max. 10mA, short-circuit proof for the control of a solid state relay (SSR) or floating relay contact for relay control (Art.-Nr. 82081.9) floating relay contact (only 3-point-operation) Alarm output • NiCr-Ni Typ K DIN IEC 584 internal zero point correction Thermocouple is monitored for cable breakage and short-circuit. Temperature range Electrical connection Terminal strip following DIN 40050 Housing 96 x 96mm for cabinet front-panel integration following DIN 43700, depth 67mm Protection: IP20; Front: IP50 Operation conditions...