Nokian multipurpose tyres 8.1 Testimonials 8.2 Nokian MPT Agile 8.3 Tubes and valves 8.4 Stud recommendations 8.5 Liquid and salt ballasting 8.6 Load capacity values at different speeds and pressures

Nokian Heavy Tyres Technical manual / Multipurpose tyres / Testimonials / The Finnish Defence Forces 8.1 Nokian MPT Agile Finnis safet A In Sodankyl, northern Finland, the temperature is nearly thirty degrees below zero centigrade as the Finnish Defence Forces are training for winter warfare. Meanwhile in Chad, central Africa, a patrol is carrying out the EU's international crisis management operation in scorching heat. Both scenarios have one thing in common: the Nokian MPT Agile tyres on the armoured and terrain vehicles. - We perform our assignments in challenging conditions. While we need...

)kian MP 8.2 tkian MPT Agile LOAD-CARRYING CAPACITY FOR FF-ROAD TRUCKS AND ARMOURED VEHICLES > Both road and off-road use > Good steering responce > Low noise level > Excellent wear resistance > Excellent mobility for summer and winter > Developed for use also with studs and chains NOKIAN MPT AGILE G = 90 km/h / 55 mph Size LI/SS Pattern TT/ TL Rim Permitted rims Width Diameter Loaded static radius Rolling circum-ference Maximum inflation pressure Load capacity kg/lb Product code mm in mm in mm±2.5%/ in±2.5% mm±2.5%/ in±2.5% kPa/p.s.i. 50 km/h 30 mph 90 km/h 55 mph 14.00R20 164 G MPT Agile TL...

Nokian Heavy Tyres Technical manual / Multipurpose tyres / Stud recommendations 8.4 Truck tyre stud (max. 3 g / 0,1 oz) 1) Nokian MPT Agile tyres are part of the truck tyre norm. Therefore: Recommended stud for truck tyres has a length of 15 mm / 19/32 nds of an inch and flange diameter of 11 mm / 14/32 nds of inch. 11 mm <-+~ 15 mm Stud Drilled stud hole Length Flange diameter Diameter Depth mm 32 nds in mm 32 nds in mm 32 nds in mm 32 nds in 15 19 11 14 5 6 13 16 2) Nokian MPT Agile tyres used in Military or i.e. Fire Truck applications can also be used with 13 mm / 16/32 nds of inch flange...

Nokian Heavy Tyres Technical manual / Multipurpose tyres / Liquid and salt ballasting 8.5 Liquid and sali ballasting LIQUID AND SALT BALLASTING > Liquid ballasting is used to increase machine stability. > It is recommended to use professional tyre outlets to carry out the filling procedure. > Special equipment and water permeable valves are required. > In liquid and salt ballasting, use tubes to prevent rims from rusting. Note! If a filler other than liquid is used (i.e. polyurethane), tyre warranty does not apply. Waier ballasting 75 % of tyre volume is filled. Amounts listed in the table below....