www.nokeval.com [email protected] PME600 and PME610 panelmeters for process inputs and temperature sensors • Pt100, thermocouple K, 4/20 mA, 0/10 V • 2 alarm relays, low and high alarm • Power supply 12 VDC for 2-wire transmitter • Output 4-20 mA (PME610) • Panel size 48 x 96 mm, only 65 mm deep • Wide power supply range 21..265 V AC or DC Place for engineering unit The panelmeter PME600 series is designed especially for temperature sensors and for the most common process inputs. Low and high alarm relays are as standard. The model 600 includes power supply 12 VDC for two wire 4-20 mA transmitter and the 610 includes output 4-20 mA. The analog output 4-20 mA is not galvanic isolated from input signal and therefore it is suitable for those applications where input signal is isolated like Pt100 sensors. The enclosure is only 65 mm deep and therefore it is suitable also for small enclosures. The panel meters are easy to configurate by using buttons in the front panel. There is only one power supply for wide voltage range covering the range of 21..265 AC or DC. This feature saves stocking and maintenance costs. Universal power supply 21..265 VAC/DC High alarm relay Output 4-20 mA Only model PME610 Model PME600 includes 12VDC power supply for 2-wire transmiter 4-20 mA Analog output is connected to common with analog input In case you need more options, please see model 2012 and 2021 which indule more functions and options like galvanically isolated output, change over alarm relays, RS485 serial output etc.

Process input: Display range Input resistance Sensor current: Temp, coffient: Cold junction: Line resistance 70 ohm, connected only when power 110 kOhm for voltage input Relay contacts: Input filter: Sample speed: Alam lights: Power suppy: Front panel: Operation temp. Adjustable (same for both of alarms) closing contacts (resistive load) Floating average of three samples Range Scaleable Order code: Special functions: 12 VDC power supply for transmitter Terminal connections: alarm alarm Power supply