Ovasense Neo SeriesUser Manual ID10990 V2 19.2.2020 Firmware 1.0-1.0

Introduction Nokeval Ovasense Neo series measuring instruments are Bluetooth® Low Energy compatible devices designed to be used together with Nokeval Ova® mobile application and Ovaport service. Ovasense Neo product family includes the following models: Ovasense Neo: thermometer equipped with an 80 mm long, 2 mm diameter stainless-steel probe with a sharp needle tip. This model is intended for measuring the internal temperature of soft, penetrable products like food. Ovasense IR Neo: non-contact thermometer equipped with an infrared (IR) sensor. This model is intended for measuring the surface...

8. Save the measuring results by tapping the Save button on the Ova app display.

Measuring with Ovasense Neo Push the sensor probe carefully into the product at least 30 mm deep. Do not use excessive force for example to try to push the probe into a frozen or hard product. Be careful also when penetrating plastic foils or similar surfaces. The sensor probe can be damaged or bent if you use excessive force on it. Wait until the reading has sufficiently stabilized on the Ova app display. You can speed up the measuring process by pushing the probe into the product before turning on the device and connecting it to the app. This way the temperature starts to stabilize even before...

Warnings Read this manual in full before operating the device. Warning! The device contains a Bluetooth® Low Energy radio module operating on 2.4 GHz frequency band. Observe local regulations concerning the use of such radio transmitters. Never switch on or operate the device in hazardous areas, or in areas where the use of radio equipment is restricted, such as aircraft, medical equipment, flammable liquids, chemicals, or blasting equipment. The device must not be disposed of in household waste. Observe local regulations concerning the disposal of electrical waste. The device contains a battery....