1. Catalogs
  2. Nokeval
  3. 7181 I/O-unit for serial RS-485

7181 I/O-unit for serial RS-485

7181 I/O-unit for serial RS-485

Product catalog summary
Overview: The 7181 I/O-unit is designed for serial transmission of alarm or switch information to or from a PC, eliminating the need for internal I/O-cards and reducing wiring when connected with a 2-wire RS-485 bus. It is suitable for transmitting fast switching data, limited by baud rate and application software. For analog information transmission, the 7100 transmitter is recommended.
Specifications:
  • 4 digital I/O-lines
  • 2-wire RS-485 bus
  • Power supply: 24 VDC
  • Mounting: 35 mm DIN-rail
  • Removable terminals: 1.5 mm²
  • Protocols: Modbus, SCL
  • Pulse output options: One shot, PWM, Pulse
Connections and Dimensions:
  • Removable terminals for easy connection
  • Mounting rail: DIN 46277
  • Dimensions: 22.5 mm x 75 mm x 60 mm
Input and Output:
  • Inputs: Switch or NPN/PNP-transistor
  • Outputs: Actuators 24 VDC, max 50 mA
Additional Features: The device supports serial communication settings via a handheld programmer or MekuWin PC-software. It includes a serial data converter for RS485/RS232 and USB (DCS770, DCS771).
See more

Catalog excerpts

7181 I/O-unit for serial RS-485-1

www.nokeval.com [email protected] 4 digital I/O-lines 2-wire RS-485 bus Power supply 24 VDC Mounting to 35 mm DIN-rail Removable terminals Modbus-, SCL-protocol Pulse output: One shot, PWM, Pulse The I/O-transmitter 7181 is designed for serial transmission of alarm or switch information from or to the PC. Using this device you can eliminate internal I/O-cards for PC. This device also reduces the amount of wiring when connected with 2-wire RS-485 bus. Serial communication settings are made either using handheld programmer or MekuWin PCsoftware. Transmission of fast switching data is limited mainly by the baud rate and the application software. To transmit analog information you can use the transmitter 7100. Serial data converter RS485 / RS232, USB (DCS770, DCS771) WinX Promolog Four I/O-lines Input: Sw itch or NPN/PNP-transistor Removable terminals 1.5 mm² Mounting rail (35 mm) DIN 46277

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.