Catalogs >
Nokeval >
541 Setpoint transmitter

541 Setpoint transmitter
2Pages

Catalog excerpts

sales@nokeval.com www.nokeval.com 541 Setpoint transmitter • 10-turn potentiometer for setpoint • Output 0/4..20 mA or 0..5/10 V • 2 alarm relays (option) • Serial RS485 output (option) • Scalable display range • Power supply 90..265 VAC or 24 VDC • Panel size 96 x 96 mm Setpoint transmitter 541 is designed for easy setpoint change. Output is adjusted via front panel 10-round potentiometer, setpoint can be locked up with mechanic friction lock. The setpoint potentiometer is selected to meet the demands of daily use. Display can be scaled according to output value freely in engineering units. Serial output RS485 and two alarm relays are available as option. If process feedback display is needed the model 2022SETP is available for Setpoint transmitter 2 alarm relays Serial RS485 output

Open the catalog to page 1

Specifications: Input: Alarms (optional): 10-turn potentiometer in the front panel 2 alarms with change-over contacts, 240 VAC, 2 A, hysteresis selectable Serial (optional): RS485, Nokeval SCL protocol, Modbus RTU. Only output value can be reaby serial bus, Output: Resolution Max load 6 digits, bright red LED, digit height 14,5 mm; brightness selectable Operating temperature -10..+60°C Terminals removable, wire 2,5 mm² Case material plastic, colour black Front panel protection IP65 Power supply 85..240 VAC or 24 V/AC Consumption 2.5 VA, 70..110 mA (24 VDC) REL2 Alarm card (option) RS Serial...

Open the catalog to page 2