NC1000 Series Amplified AWGN Noise Modules 10 Hz to 10 GHz

Product catalog summary

Overview: The NC1000 series modules are designed to produce amplified white Gaussian noise (AWGN) up to +13 dBm. These modules are suitable for secure communication, signal jamming, and signal impairment applications such as Bit Error Rate (BER) and Jitter testing.

Applications: The modules are applicable in various fields including CATV/HDTV, signal jamming, secure communications, jitter applications, 10 GigE, and PCI Express.

Specifications:

High power output up to +13 dBm.
Standard input voltage: +28 VDC for frequencies below 1.5 GHz and +15 VDC for frequencies above 1.5 GHz.
Operating temperature range: -35°C to +100°C.
Storage temperature range: -65°C to +150°C.
Typical temperature coefficient: 0.025 dB/°C.
Supply voltage sensitivity: 0.25 dB/1%∆V.
Output connector: SMA female connector, with BNC available as an option.

Options:

NC1opt01: +15 VDC operation.
NC1opt02: +24 VDC operation.
NC1opt03: BNC female connector for specific models.
NC1opt04: 0 dBm output for specific models.
NC1opt05: TTL control with "High" as on.
NC1opt06: TTL control with "Low" as on.
NC1opt07: Special frequency range available upon consultation.

Model Specifications:

High Power Modules: Frequency range from 10 Hz to 1.5 GHz with varying output power and flatness.
High Crest Factor Modules: Frequency range from 1 GHz to 10 GHz with varying output power and flatness.

Contact Information: Wireless Telecom Group Inc., 25 Eastmans Rd, Parsippany, NJ, United States. Tel: +1 973 386 9696, Fax: +1 973 386 9191, Website: www.noisecom.com

Note: Specifications, terms, and conditions are subject to change without prior notice.

Catalog excerpts

NC1000 Series Amplified AWGN Noise Modules 10 Hz to 10 GHz-1

! NCIOOO Series Amplified AWGN Noise Modules The NCIOOO series modules produce white Gaussian noise AWGN up to +13 dBm. The high power modules are designed for secure communication and signal jamming, while the low power modules with high crest factor are used for signal impairment in Each module contains a hermetically packaged noise diode that has been pre-selected for special performance characteristics. The standard module is designed for a 50 Q load impedance. • Signal jamming • Secure communications • Jitter applications • Optimal Amplifiers Standard input Voltage +28VDC (below 1.5 GHz) Typical temperature coefficient 0.025 dB/°C Supply voltage sensitivity 0.25 dB/l%AV Output connector SMA female connector through NClllOAonly) NClopt07 Special frequency range (consult factory) Count on the Noise Leader

Open the catalog to page 1

NC1000 Series Amplified AWGN Noise Modules 10 Hz to 10 GHz-2

High Power Modules 50 Q Load Impedance (Package 1, +28 VDC Operation is standard) INPUT VOLTAGE SOLDER TERMINAL NC1000 Series Dimensions - Package 1 (inches) INPUT VOLTAGE SOLDER TERMINAL SOLDER TERM. NC1000 Series Dimensions - Package 2 (inches) SOLDER TERM. NC1000 Series Dimensions - Package 3 (inches) Wireless Telecom Group Inc. United States ® Wireless Telecom Group Boonton Microlab Noisecom Note: Specifications, terms and conditions are subject to change without prior notice.

Open the catalog to page 2