Catalog excerpts
Noga Cooling Systems simply sophisticated
Open the catalog to page 1Innovation is the beneficial utilization of knowledge and creativity, in order to discover and realize what does not yet exist. Erik Keldmann simply sophisticated
Open the catalog to page 2Noga Head Office NOGA ENGINEERING & TECHNOLOGY (2008) LTD Noga Engineering and Technology was established in 1980. Over the years the company has grown to become the world leader in the manufacturing of three main lines: Deburring Systems Holding Systems Cutting Fluid Applicators Noga’s strongest points are product design and development, quality and service. Our products are sold in more than 60 countries either through our own companies or a network of exclusive agents. simply sophisticated
Open the catalog to page 3All NOGA products meet the strict requirements of ISO 9001 and ISO 14001. We invite you to visit our web site: www.noga.com for further information. NOGA reserves the right to make changes in any of its products without prior notice. © Copyright NOGA Engineering & Technology (2008) Ltd. • Blades are sharp and can cut. • Blades can break causing flying shards. • Sharp edges and flying shards can cause injury. • Wear safety googles (both user and bystanders). • Do not pry or bend blades. • Keep away from children. • Do not regrind blades. All rights reserved. No part of this publication may...
Open the catalog to page 4Cooling Systems CUTING FLUID APLICATORS DEBURING SYSTEMS MINICOL 3-4 FIXED & VARI HP (HIGH PRESURE) COL 5-6 NOGACOL Systems 7-8 HOLDING COBRA 9-12 cOLING SYSTEMS CUTTING FLUID APPLICATORS INDEX simply sophisticated
Open the catalog to page 5Cooling Systems CUTTING FLUID APPLICATORS
Open the catalog to page 6Contents NOGA Cutting Fluid Applicators were designed to answer various needs for cooling during machining, turning, drilling tapping etc. They are made in four different designs: MINICOOL have air and liquid mixture forms a ine spray that cools all metal cutting operations. FIXED & VARI HP (High Pressure) COL The Fixed HP Cool Arm and Vari HP Cool arms deliver luids or cooling liquids at high pressure, up to 1000 PSI, allowing a higher level of machining. Easy and fast to set in position. Can be itted with different sizes of nozzles. The NOGACOOL consists of a manifold and lexible...
Open the catalog to page 7NOGA MINICOOL uses the VENTURI principle to spray an air and liquid mixture. It consists of the following basic parts: A control valve, spray unit, air line, syphon line and a powerful on/off Popeye magnet, which has a "V" form base, making it possible to mount on non-flat surfaces. The MINICOOL enables the user to easily control both the air flow rate and liquid rate. Stainless steel armoured syphon hose and air hose are made in a standard one meter length (special lengths available upon request). The spray unit comes in three standard lengths: 264, 334, 479 mm (special lengths available...
Open the catalog to page 8order no. MiniCool MC1700 For Maximum heat dissipation and extended tool life • Strong magnetic base • Separate on/off air and fluid controls • Stainless steel armoured syphon hose and air hose One spray unit of length (mm) Nozzle connected via Loc-Line® flexible hose Simple, inexpensive, rugged Single spray unit SPARE PARTSorder no. MC0130 control valve with popeye magnet MiniCool MC3000 • Same as MCI 700 but with 2 spray units MC0101 MC0102 MC0103 spray unit 270 mm spray unit 340 mm spray unit 485 mm MC0380 MC0302 MC0360 MC0311 MC0204 MC3637 suction line 1 m suction line 2 m valve stem...
Open the catalog to page 9Fixed & Vari HP Cool Arms HP-HI G PRESSU H RE NOGA is introducing its patent pending newest product to the Cooling Systems line. The Fixed HP Cool Arm and Vari HP Cool arms deliver luids or cooling liquids at high pressure, up to 1000 PSI, allowing a higher level of machining. Easy and fast to set in position. Can be itted with different sizes of nozzles.
Open the catalog to page 10Fixed & Vari HP Cool Arms SPARE PARTS MINI VARI HP COOL ARM CA3500 Single arm with 2 end ball joints so the nozzles can move on wide curve for positioning. Same as CA3000 but with shortened articulated arms. Dimensions: Length: 84 mm Thread: Int. M 6 Dimensions: Length: 164 mm Thread: Int. NPT 1/4” VARI HP COOL ARM CA3000 Long articulated arms provide full axis rotation. Sturdy tightening ixtures for total stability. more adaptors are availble upon request. The CA3500 is provided with: CA1010 Hex Key CA1007 Nozzle CA1008 Adaptor HEX KEY CA1010 Dimensions: Length: 206 mm Thread: Int. NPT...
Open the catalog to page 11NogaCool NOGACOOL consists of a manifold & Loc-Line® lexible hose with a nozzle on top and a valve at the bottom, assembled on the powerful on/off Popeye magnet. The plug attached can be replaced by a second Loc-Line® lexible hose. NOGACOOL is supplied with a set of three nozzles: 1/16”, 1/8” and 1/4”. Working conditions are as follows: • Pressure: 2-3.4 Bar (30-50 Psi) • Flow rate: 940 l/hour (250 gal/hour) • Max. working temp. 170˚C Also available with magnet and manifold only (order no. MC0161).
Open the catalog to page 12SPARE PARTS order no. NF0037 320N popeye magnet top thread M5 324 mm lexible Loc-Line® hose MC0161 INCLUDES: NF 0037 magnetic base MC0156 manifold Other dimensions available upon request. Wide plastic nozzle 16 holes Ø1 mm Wide plastic nozzle 16 holes Ø1.5 mm simply sophi
Open the catalog to page 13COBRA 's drop ejector is designed to accurately shoot small quantities of liquid to distinct targets. An air actuated piston shoots the drops through a flexible hose onto the target. The drop shots can be automatically timed or manually determined by the user, the amount of liquid in each shot can also be adjusted by a tuning screw at the back of the COBRA all according to the user's needs. The COBRA is operated by clean air, pressure 3-9 bar. Most liquids and solvents up to 250 cst viscosity can be applied.
Open the catalog to page 14COBRA CB2000 INCLUDES: Basic Cobra only COBRA SET CB2100 INCLUDES: Basic Cobra CB2000 Small container CB0146 Mechanical valve SH1000 Magnet DG0036 Arm DG60013 Adaptor DG0129 Nylon tube RM8050 See drawing on page 123 SPARE PARTS order no. banjo screw & washer banjo fitting RInoga simply sophisticated
Open the catalog to page 15All Noga Engineering catalogs and technical brochures
-
SP7700
2 Pages
-
YT Range
2 Pages
-
plastic Leaflet
1 Pages
-
deburring system
30 Pages
-
Cooling System
6 Pages
-
cobra
2 Pages
-
MINICOOL
2 Pages
-
noco
1 Pages
-
NOGA CHIP HOOKS
2 Pages
-
PH holders FAB
2 Pages
-
PH holders FAT
2 Pages
-
Articulated holders FAB
2 Pages
-
Articulated holders FAT
2 Pages
-
New Products 2014
11 Pages
-
THE YT RANGE
2 Pages
-
Blades and Applications
1 Pages
-
Holding Catalog 2
10 Pages
-
Holding Catalog 1
12 Pages
-
Deburring
12 Pages
-
Cooling System
6 Pages
-
Counter brush
2 Pages
-
BASES
2 Pages
-
SPECIALTY BLADES
1 Pages
-
UNIVERSAL HANDY CHUCK HOLDER
3 Pages
-
SETS
5 Pages
-
CONVEXED CERA-CUT
3 Pages
-
NOGA O-RING BURR
2 Pages
-
MINI SCRAPER
4 Pages
-
COUNTERSINK
4 Pages
-
chip hooks
2 Pages
Archived catalogs
-
Specialty blades
1 Pages
-
Ceramic tools
2 Pages
-
Nogacool cooling system
1 Pages
-
Minicool cooling system
2 Pages
-
Cobra cooling system
2 Pages
-
Modular holders
2 Pages
-
Sets & indicators
2 Pages