*mydirectindustry

PR10

1 / 3 PagesView full catalog

PR10

Product catalog summary

Performance Features

Simple on-site operation via DIP Switch.
Dry ceramic sensor with a measuring range from 0 to 250 mbar up to 250 bar, including negative pressure up to -1 bar.
Accuracy of ≤ 0.5% and compact design.
Analog output of 4…20 mA, 3-Wires and contact output of DC PNP, max. 200 mA.

Areas of Application

Suitable for gaseous, liquid, abrasive, and aggressive media, as well as vacuum applications.

Technical Data

Measuring ranges are customizable, with standard ranges provided in the datasheet.
Power supply for 20 mA output is 19…30 V DC.
Signal characteristics include an accuracy of ≤ ±0.5% FS at 25°C and a response time of 50 ms.
Temperature ranges: Medium (-25 to 100°C), Surrounding (-25 to 85°C), Storage (-40 to 85°C).
Electrical protections include permanent short-circuit resistance and reverse polarity protection.
Wetted materials include stainless steel 1.4404 and ceramic Al2O3.
Protection type is IP 67.

Electrical Connections

Includes cable gland M16x1.5 and connector M12x1, 4-pole.

Ordering Code

Various measuring ranges and sensor seals available, with options for electrical connections and material housing.

Catalog excerpts

PERFORMANCE FEATURESSimple on-site operation via DIP Switch ■ Dry ceramic sensor ■ Smallest measuring range: 0.. .250 mbar ■ Largest measuring range: 0.250 bar ■ Negative pressure measuring range: up to -1 bar The pressure switch PR10 features a freely adjustable set point in combination with a ceramic sensor. Resistant to aggressive and abrasive media, it offers a wide range of applications. The electrical connection is provided via an integrated clamping strip, while the PG11 cable gland offers IP 67 dust and water protection. Its compact housing is made of high-quality stainless steel 1.4404 and is therefore suitable for almost all media. Our modular design concept provides a wide variety of products. Feel free to contact us if you need a customization that is not listed in this datasheet. AREAS OF APPLICATION ■ Gaseous media Noding Messtechnik GmbH • Oldenfelder Bogen 29 • D-22143 Hamburg, Germany • Tel.: 040 / 67 58 51 - 0 Fax: 040 / 67 58 51 - 49 • Internet: www.noeding-messtechnik.de • E-mail: info@noeding-messtechn

Open the catalog to page 1

■ ELECTRICAL CONNECTIONS Measuring ranges ■ SETTINGS Hysteresis adjustment - Noding Messtechnik GmbH • Oldenfelder Bogen 29 • D-22143 Hamburg, Germany • Tel.: 040 / 67 58 51 - 0 Fax: 040 / 67 58 51 - 49 • Internet: www.noeding-messtechnik.de • E-mail: [email protected]

Open the catalog to page 2

■ MEASURING RANGES Measuring ranges Ranges Measuring ranges see table 99 Non-standard range (on request) Process connection and material G G 1/2 A a. 11,6 mm drill hole, ISO 228-1, 1.4404 9 Others (on request) Sensor seal 1 FPM (Viton), standard 5 FFKM (Chemraz / Kalrez) 9 Others (on request) Material housing 1 Stainless steel 1.4301 Electrical connection 0 Cable gland M16x1,5 A Connector M12x1 4-pole 0 Without potted electronics 06/2022 A - Modifications reserved without notice

Open the catalog to page 3

PR10

PR10

Catalog excerpts

All Nöding Messtechnik catalogs and technical brochures