*mydirectindustry

P10

1 / 4 PagesView full catalog

P10

Product catalog summary

Performance Features:

Utilizes a dry ceramic sensor, optimized for cost-effective standard applications.
Measurement range from 0 to 250 mbar up to 0 to 250 bar, including negative pressure up to -1 bar.
Compact and durable design with accuracy ≤ 0.5%.
Analog output options include 4-20 mA (2-wires), 0-10 V (3-wires), 0-5 V (3-wires), and 0.5-4.5 V (3-wires, ratiometric).

Areas of Application:

Suitable for gaseous, liquid, abrasive, and aggressive media, as well as vacuum applications.

Technical Data:

Pressure range options detailed in the 'Measuring Ranges' table, with custom ranges available on request.
Power supply requirements vary by output type, ranging from 5 V DC to 30 V DC.
Signal characteristics include accuracy of ≤ ±0.5% FS at 25°C and a response time of 50 ms.
Temperature ranges: medium (-25 to 100°C), surrounding (-25 to 80°C), and storage (-40 to 85°C).
Electrical protections include permanent short-circuit resistance and reverse polarity protection.
Wetted materials include stainless steel 1.4404 and ceramic Al₂O₃.

Electrical Connection:

Various connection options including 4-20 mA (2-wires) and 0-10 V (3-wires) with specific pin configurations.

Ordering Code:

Includes options for process connection, output signal, measuring ranges, sensor seal, electrical connection, and additional options.

Measuring Ranges:

Detailed table of relative and absolute pressure ranges with corresponding overload capacities.

Dimensions:

Various process connection types with specific dimensions provided.

Catalog excerpts

P10 Datasheet Pressure Transmitter P10PERFORMANCE FEATURESDry ceramic sensor ■ Cost optimized for standard applications ■ Smallest measuring range: 0.. .250 mbar ■ Largest measuring range: 0.250 bar ■ Negative pressure measuring range: up to -1 bar ■ Compact and rugged design The P10 pressure sensor provides a cost-optimized alternative to capacitive sensors. The piezoresistive principle in combination with a ceramic membrane is resistant to aggressive and abrasive media. Its compact housing is made of high-quality stainless steel 1.4404 and is therefore suitable for almost all media. Our modular design concept provides a wide variety of products. Feel free to contact us if you need a customization that is not listed in this datasheet. AREAS OF APPLICATION ■ Gaseous media Noding Messtechnik GmbH • Oldenfelder Bogen 29 • D-22143 Hamburg, Germany • Tel.: 040 / 67 58 51 - 0 Fax: 040 / 67 58 51 - 49 • Internet: www.noeding-messtechnik.de • E-mail: info@noeding-messtechnik

Open the catalog to page 1

■ ELECTRICAL CONNECTION Measuring range Pressure range See table "Measuring ranges" black: Signal - 0,02 A Noding Messtechnik GmbH • Oldenfelder Bogen 29 • D-22143 Hamburg, Germany • Tel.: 040 / 67 58 51 - 0 Fax: 040 / 67 58 51 - 49 • Internet: www.noeding-messtechnik.de • E-mail: [email protected]

Open the catalog to page 2

■ MEASURING RANGES ■ ORDERING CODE Measuring ranges Measuring ranges see table 99 Non-standard range (on request) Process connection and material D G 1/4 A, DIN EN ISO 1179-2, 1.4404 Sensor seal 1 FPM (Viton), standard 5 FFKM (Chemraz / Kalrez) 0 Without potted electronics Noding Messtechnik GmbH • Oldenfelder Bogen 29 • D-22143 Hamburg, Germany • Tel.: 040 / 67 58 51 - 0 Fax: 040 / 67 58 51 - 49 • Internet: www.noeding-messtechnik.de • E-mail: [email protected]

Open the catalog to page 3

A27 PROCESS CONNECTION ■ TYPE 3 PROCESS CONNECTION ■ TYPE DN A27 07/2024 A - Modifications reserved without notice Noding Messtechnik GmbH • Oldenfelder Bogen 29 • D-22143 Hamburg, Germany • Tel.: 040 / 67 58 51 - 0 Fax: 040 / 67 58 51 - 49 • Internet: www.noeding-messtechnik.de • E-mail: [email protected]

Open the catalog to page 4

P10

P10

Catalog excerpts

All Nöding Messtechnik catalogs and technical brochures