Vliesex The yield is crucial Photo: NOCK Vliesex V 5744 TURBO Membrane skinning machines

Vliesex V 460N • V 560N Features and application range n cutting width: 430 mm (V 460N) 500 mm (V 560N) n cutting speed: 37 m/min n particularly good value membrane skinning machines with high operational speed and very high yield n to remove the membrane from pork, beef, veal, lamb, turkey, game, poultry Photo: Vliesex V 460N n industry suited construction Spring suspension of blade holder Standard equipment Transport roller Trapeze-shaped casing for maximum stability when transporting the machine over uneven surfaces. n high precision transport roller without grooves n robust precision blade...

Vliesex V 4744 TURBO • V 5744 TURBO Features and application range n cutting width: 430 mm (V 4744 TURBO) 500 mm (V 5744 TURBO) n cutting speed: 44 m/min n high performance membrane skinner for industrial plants with intensive use and highest demands on performance and yield n very high cutting speed Photo: Vliesex V 5744 TURBO n to remove the membrane from pork, beef, veal, lamb, turkey, game, poultry Standard equipment n level processing table so that the product ­ can be fed and removed from all sides n reinforced precision blade holder • spring suspended for best yield by automatic adjustment...

Highest attainable yield As with every processing procedure, the enhancement of the product when membraning must exceed the emerging costs. When the membrane is removed from a product, the highest possible yield, that means a minimum loss of expensive meat, is crucial. The NOCK membrane skinning machines are highly developed, robust high precision machines with a yield which is not gradable with technical means: For membrane skinning an optimum adjustment of the blade geometry, blade holder and transport roller is essential. This is only guaranteed when processing with original NOCK TOP H blades....

for the NOCK membrane skinning machines NOCK-typical robustness, reliability and service friendliness The mechanically highly strained machine parts such as drive, transport roller and blade holder are mounted on the solid, 15 mm thick base plates, the NOCK POWER PLATES®. These plates are located in the machine casing. This construction of the NOCK machines, which is proven since 1990, guarantees: Every service technician can easily understand the clear and low-service construction of the NOCK machines. A specialist is not required for servicing. Therefore the NOCK machines are highly appreciated...

Technical data + equipment / Membrane skinning machines Vliesex Vliesex V 460 N cutting speed (m/min) transport roller without grooves dynamic (counter rotating) stainless steel cleaning roller NOCK Air Jet compressed air cleaning system foot switch adjustable in height spring suspended blade holder quick change system for blades fine adjustment of blade holder trapeze-shaped casing transport roller with two different toothings across the width lockable castors NOCK POWER PLATES® 5 < ␳ < 10 – quick lock coupling DN 7.2 (G 1/4“ external) approx. 250 l/min (ambient pressure) compressed air consumption...