1. Catalogs
  2. NLIR
  3. INSPECTION OF INFRARED COATINGS
video corpo

INSPECTION OF INFRARED COATINGS

INSPECTION OF INFRARED COATINGS

INSPECTION OF INFRARED COATINGS

Product catalog summary
Introduction
The document discusses the characterization of infrared (IR) optical coatings using NLIR's MIDWAVE Spectrometer, which offers fast and sensitive spectroscopy for inspecting the precision and performance of IR coatings on various optical surfaces.
Specifications
The MIDWAVE Spectrometer features a bandwidth of 2.0 – 5.0 µm and a resolution of 6 cm-1. It provides a maximum full-spectrum readout rate of 400 Hz, allowing for rapid data acquisition in milliseconds, unlike conventional FTIR spectrometers.
IR Coating Characterization
To address challenges in light guidance during coating inspection, NLIR has developed two fiber-coupled interfaces: the TRANSMISSION Interface and the PRECISION Interface. These interfaces facilitate accurate measurements in both transmission and reflection modes, with a minimum detectable power of 5 pW/nm, enabling the measurement of dark or low-reflective samples.
Measurement Examples
The TRANSMISSION Interface was tested by measuring the transmission of three bandpass filters and one neutral density filter. The spectrometer acquired single-shot data with an exposure time of 10 ms, demonstrating its speed and reliability. The raw data, plotted relative to a reference, highlights the spectrometer's capability for fast and reliable coating inspection.
See more

Catalog excerpts

INSPECTION OF INFRARED COATINGS-1

INSPECTION OFINFRARED OPTICAL COATINGS Chracterization of IR Optical Coatings in Real Time MEMBER OF THE NYNOMIC GROUP

 Open the catalog to page 1
INSPECTION OF INFRARED COATINGS-2

Infrared Coating Characterization FAST AND SENSITIVE SPECTROSCOPY Our MIDWAVE Spectrometer is the perfect tool for inspecting the precision and performance of infrared optical coatings on various optical surfaces. too long to provide accurate results, our fast and sensitive MIDWAVE Spectrometer can deliver useful data in just a few milliseconds. Unlike conventional FTIR spectrometers that can take Together with a bandwidth of 2.0 – 5.0 µm and a resolution of 6 cm-1, our MIDWAVE Spectrometer boasts a maximum full- spectrum readout rate of 400 Hz, making it a reliable and efficient solution for...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.