10mm Ultra-Thin DIP; 100mA @ 5V DC; 100mA @ 50V DC Straight PC & Right Angle PC Through-hole Mount Decimal & Hexadecimal 0.4VA & 250mA Logic Level Process Sealed Straight PC PC & Bushing Mount Power Rated 2A, 3A, 5A & 10A @ 125V AC PC Turret, Turret & Solder Lug Bushing Mount 0.4VA Logic Level Process Sealed Straight & Right Angle Bracketed PC 8mm Process Sealed DIP; 100mA @ 5V DC Straight & Right Angle PC Decimal & Hexadecimal 8mm Process Sealed DIP; 100mA @ 5V DC Gull Wing Terminals Upright & Right Angle Mount Decimal & Hexadecimal

Contents Toggles 30A @ 125V AC 1-5 Poles 2-11 Positions Nonshorting Screw Lug Bushing Mount 6A &12A @ 125V AC HS13: 2-4 Positions; Nonshorting HS16: 1-6 Poles; 2-11 Positions; Nonshorting or Shorting Solder Lug Bushing Mount

General Specifications Electrical Capacity (Resistive Load) Switching Rating: 100mA @ 5V DC Other Ratings Materials & Finishes Actuators: Bushing : Outer Case: Housing & Base: Movable Contacts: Stationary Contacts: Terminals: Terminal Cover: Bracket: Environmental Data Contact Resistance: 100 milliohms maximum; 30 milliohms maximum for contact point Insulation Resistance: 1,000 megohms minimum @ 250V DC Dielectric Strength: 250V AC minimum for 1 minute minimum Mechanical Life: 10,000 detent operations minimum Electrical Life: 10,000 detent operations minimum Notes: A detent operation is one actuator...

Distinctive Characteristics Compact dimensions and low profile allow high density mounting and close stacking of PC boards. Highly visible legends and choice of screwdriver, shaft or dial actuators with arrow position indication provide trouble-free code setting. Knob actuator also available. Detent mechanism gives crisp, positive action for accurate switch setting. Real or complement code setting identified by color-keyed actuator. Crimped terminals ensure secure PC mounting and prevent dislodging during soldering. Cam activated movable contact and gold contacts assure contact reliability and...

10mm DIP Rotaries TYPICAL SWITCH ORDERING EXAMPLE Actuation Screwdriver Plastic Shaft Complement Coded (Yellow Actuator) Real Coded (Orange Actuator) Right Angle Color not applicable to Actuator A Dial (for Straight Terminals only) Metal Shaft (for Optional Knobs) *Must be used with Bracket No Bracket With Bracket DESCRIPTION FOR TYPICAL ORDERING EXAMPLE Plastic Shaft Hexadecimal Positions Real Coded Adjusted with a flat tipped screwdriver Actuators are fully rotational either clockwise or counterclockwise. Actuator Colors: Orange for real coded devices; Yellow for complement coded devices. AT4180...

Metal Shaft Knob options illustrated below with color choices Adjusted by hand or with flat tipped screwdriver Actuators are fully rotational and operate either clockwise or counterclockwise. Colors for Actuators K and S: Orange for real coded devices; Yellow for complement coded devices Mounting hardware is available if needed for models with Actuator A: Hexagon Nut AT513M, Locking Ring AT515M, and Lockwasher AT509; all are shown in the Accessories and Hardware section. AT4103 Small Color Tipped Material: Polyacetal Color: Black AT4104 Large Color Tipped (16.0) Dia .630 (9.5) Dia .374 Polyester...

10mm DIP Rotaries TYPICAL SWITCH DIMENSIONS Straight PC • Plastic Shaft Right Angle PC • Plastic Shaft Right Angle PC • Screwdriver Hexadecimal www.nkk.com

10mm DIP Rotaries TYPICAL SWITCH DIMENSIONS Shown in Position 0 with shaft flat rotated 180° from bushing flat Right Angle PC • Metal Shaft Shown in Position 0 with shaft flat rotated 180° from bushing flat Straight PC • Metal Shaft

FR01F, FR01K & FR01S Each stick-tube contains 50 switches. Switches must be ordered in 50-piece increments. FR01A Each stick-tube contains 25 switches. Switches must be ordered in 25-piece increments. Note: Transport and storage temperatures should not exceed 50°C (122°F). Store stick tubes on flat surface. FR01F with Screwdriver Actuation & Straight PC Keylocks Rotaries FR01K with Plastic Shaft & Right Angle PC FR01S with Dial Actuation & Straight PC FR01A with Metal Shaft & Straight PC FR01A with Metal Shaft & Right Angle PC

General Specifications Electrical Capacity (Resistive Load) Switching Rating: 100mA @ 5V DC Other Ratings Contact Resistance: 100 milliohms maximum for circuit; 30 milliohms maximum for contact point Insulation Resistance: 1,000 megohms minimum @ 250V DC Dielectric Strength: 250V AC minimum for 1 minute minimum Mechanical Life: 10,000 detent operations minimum Electrical Life: 10,000 detent operations minimum Notes: A detent operation is one actuator position operation or stepping. A cycle is one 360° rotation. 10,000 detent operations equal 625 cycles for hexadecimal devices or 1,000 cycles...

Distinctive Characteristics Slim .150” (3.8mm) body has the lowest profile in the industry and allows close stacking of PC boards. Highly visible legends and choice of screwdriver or shaft actuators with arrow position indication provide trouble-free code setting. Detent mechanism gives crisp, positive action for accurate switch setting. Gull-winged terminals ensure mechanical stability during soldering and simplify solder joint inspection. Cam activated movable contact and gold contacts assure contact reliability and continuity. Tape-reel packaging meets EIA-481-2 Standard. Coplanarity: all...

10mm Ultra-Thin SMT DIP Rotaries TYPICAL SWITCH ORDERING EXAMPLE Real Coded (Orange Actuator) Gull Wing for Upright Mount Complement Coded (Yellow Actuator) Plastic Shaft DESCRIPTION FOR TYPICAL ORDERING EXAMPLE Shaft Actuated Hexadecimal Actuator Positions Real Coded Gull Wing Terminals for Upright Mount Plastic Shaft Adjusted by hand or with flat tipped screwdriver Adjusted with a flat tipped screwdriver Tilt Actuators are fully rotational either clockwise or counterclockwise. Actuator Colors: Orange for real coded devices; Yellow for complement coded devices. TYPICAL SWITCH DIMENSIONS Upright...