Process Sealed Ultra-Miniature Toggles General Specifications Electrical Capacity (Resistive Load) Logic Level: 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: Find additional explanation of operating range in Supplement section. Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Nominal Operating Force: Angle of Throw: Actuator: Case: Sealing Rings: Movable Contacts: Stationary Contacts: Base: Terminals: Support Bracket: Glass fiber reinforced polyamide Glass fiber reinforced polyamide Nitrile butadiene rubber Phosphor bronze with gold plating Phosphor bronze with gold plating Glass fiber reinforced polyamide Phosphor bronze with gold plating Phosphor bronze with tin plating Environmental Data Operating Temperature Range: –25°C through +85°C (–13°F through +185°F) Humidity: 90 ~ 95% humidity for 96 hours @ 40°C (104°F) Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours Shock: 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Soldering: Wave Soldering recommended: See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section. Cleaning: Automated cleaning. See Cleaning specifications in Supplement section. Standards & Certifications The G Series toggles have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy. Materials & Finishes 80 milliohms maximum 500 megohms minimum @ 500V DC 500V AC minimum for 1 minute minimum 100,000 operations minimum for On-None-On & On-Off-On 50,000 operations minimum for other circuits 100,000 operations minimum for On-None-On & On-Off-On 50,000 operations minimum for other circuits 0.93N for momentary & 1.20N for maintained 28°

Distinctive Characteristics Process Sealed Ultra-Miniature Toggles Ultra-miniature size allows high density mounting, and extremely light weight of 0.25 gram makes these switches ideal for handheld equipment. Totally sealed body construction prevents contact contamination and allows time- and money-saving automated soldering and cleaning. Molded-in, epoxy sealed terminals lock out flux, solvents, and other contaminants. Award-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smooth, positive detent actuation, increased contact stability, and unparalleled logic-level...

Process Sealed Ultra-Miniature Toggles TYPICAL SWITCH ORDERING EXAMPLE Right Angle Vertical DESCRIPTION FOR TYPICAL ORDERING EXAMPLE G13AH SPDT ON-OFF-ON Circuit Right Angle PC Terminals POLES & CIRCUITS Toggle Position ( ) = Momentary Up Connected Terminals Throw & Schematics Terminal numbers are not actually on the switch.

TYPICAL SWITCH DIMENSIONS Single & Double Pole On single pole models, locations 1 & 3 are for support pins. Single & Double Pole 28° Right Angle Single & Double Pole Process Sealed Ultra-Miniature Toggles