Catalog excerpts
SMART BUILDING SMART INDUSTRY Remote temperature sensor The REMOTE TEMPERATURE SENSOR is dedicated to temperature measurement in buildings, temperature controlled rooms, cooling towers and transmits data over a public or private LoRaWAN® radio network. APPLICATIONS Food industry: supervision of refrigeration installations in logistics centres, storage centres. Industrial processes: supervision of equipment temperatures, water, air and gas piping. Energy optimisation of buildings (residential, tertiary): supervision of heating, ventilation and air conditioning installations. Indoor or outdoor environment. LoRaWAN®, Class A Easy to install and use. Remote temperature sensor (NTC) Instantaneous temperature measurement. Measurement of minimum/maximum/average temperature over 24 hours (UDT). Differential data compression 12 years autonomy (data compression mode) IP55 RATING Sensors delivered neutral face without marking nke WATTECO CE, RoHS The remote temperature sensor periodically measures and transmits the temperature as well as any alarms for exceeding pre-configured temperature thresholds, via a public or private LoRaWAN® communication network. It is dedicated to the supervision of hot spots (industrial equipment, multi-fluid piping, etc.), cold spots (temperature-controlled rooms, cooling towers, etc.) and the temperature of buildings (industrial and tertiary). The sensor is also capable of transmitting the temperatures (average, minimum, maximum) measured over a 24-hour period. This makes it possible to calculate the unified degree days (UDD), an indicator for monitoring the energy consumption of a building. Installation and commissioning is quick and easy. The sensor is equipped with : - an NFC identification tag (product number, serial number, production batch) - a magnetic switch for activation and deactivation The measured temperature data can be stored in local memory and compressed before being transmitted over a LoRaWAN® network. This technique significantly reduces the amount of data transmitted while preserving the sensor's autonomy. When powered by a 3.6V/3.6Ah battery, the sensor's autonomy is 12 years (data compression mode) for a configuration performing one measurement per hour and one transmission per day WE HAVE THE RIGHT SENSORS FOR YOUR NEEDS nke WATTECO is a leading European designer and manufacturer of intelligent radio frequency sensors and actuators as well as multi-protocol remote reading and data collection solutions. nke WATTECO is a member of the LoRa Alliance®. nke WATTECO - Headquarters: 6 rue Gutenberg, ZI Kerandré , 56700 Hennebont, France - Tel: 33 (0)2 97 85 67 65 For more information, contact us: info.wattec
Open the catalog to page 1Remote temperature sensor TECHNICAL CHARACTERISTICS RADIOFREQUENCY Activation method Activation by Personalization (ABP) Over-The-Air Activation (OTAA) Data encryption Alarm detection Data compression Instantaneous measurements Measurement of unified degree days (UDD) On / Off Alarm threshold configuration Min / Max temperature: - 40°C to +90°C in 1°C steps Battery voltage: 0.1V to 3.6V in 0.1V steps TEMPERATURE MEASUREMENT POWER SUPPLY 12 years: Compressed data / 1 measurement per hour / 1 transmission per day 9 years: Non-compressed data / 1 measurement per hour / 1 transmission per day...
Open the catalog to page 2All Nke WATTECO catalogs and technical brochures
-
Skyd’O Sensor
2 Pages
-
Pulse S0
2 Pages
-
PRESS’O
2 Pages
-
Outdoor Temperature Sensor
2 Pages
-
MONIT’O
2 Pages
-
ModBus/LoRaWAN® Bridge
2 Pages
-
Lev'O+
2 Pages
-
INTENS'O
2 Pages
-
Indoor Temperature Sensor
2 Pages
-
IN’O
2 Pages
-
VMC Gas & Sanitary Sensor
2 Pages
-
Flash’O sensor
2 Pages
-
FLASH'O
2 Pages
-
Clos’O Sensor
2 Pages
-
VAQA'O +
2 Pages
-
VAQA'O
2 Pages
-
AMBIENT TEMPERATURE SENSOR
2 Pages
-
Atm’O sensor
2 Pages
-
Pulse Sens'O AtEx zone 1
2 Pages
-
Alarm Report sensor
2 Pages
-
Remote Temperature Sensor 2
2 Pages