Remote Temperature Sensor 2
2Pages

SMART BUILDING SMART INDUSTRY Remote Temperature Sensor 2 Probes The Remote Temperature Sensor 2 Probes is dedicated to temperature measurement in buildings, and transmits datas over a public or private LoRaWAN® radio network. processes: supervision of equipment temperatures and water piping.  Maintenance of building equipment (residential, tertiary): monitoring of the hot water network (DHW), supervision of heating installations,  Indoor or outdoor environment. BENEFITS & FEATURES  LoRaWAN®, Class A.  Easy to install and use.  2 remote temperature probes; IPx7 waterproof probe; stainless steel tip for better reactivity; diameter less than 6mm, blue and red colour markings.  Waterproof for protected indoor or outdoor environments  12 years of autonomy. The remote 2-probe temperature sensor allows remote temperature reading at two points in a boiler room, DHW production, cooling tower or cold room installation. The sensors can be placed against the pipes (and insulated with insulating tape) or inserted in the immersion sleeve. The data transmission on the public or private LoRaWAN® network is done periodically or immediately in case of alert following the exceeding of minimum or maximum temperature thresholds. Powered by a 3.6V/3600mAh battery, the autonomy of the sensor for a capacity of 85% used is at least 12 years, with 1 transmission every 2 hours. By default, the sensor is configured for batch mode reporting of the temperature of probe 1 and probe 2 every hour with a measurement every 10 minutes. The battery voltage level is monitored and remotely updated every 7 days. Installation and commissioning are quick and easy. The sensor is equipped with: - a switch (ILS) allowing activation or deactivation, - LEDs to monitor the configuration and association on the network. Each sensor is identified by a QR code on the label and an NFC tag in the box THE LARGEST IOT PRODUCTS RANGE FOR YOUR PROJECT nke WATTECO is a European leader in the design and manufacture of intelligent IoT devices to fit to all remote reading and data collection solutions. nke WATTECO is a LoRa Alliance® member. nke WATTECO - 6 rue Gutenberg, ZI Kerandré , 56700 Hennebont, France - Tel: +33 2 97 85 67 65 For more information, contact us: info.watteco@nke.fr -

Remote Temperature Sensor 2 Probes RADIOFREQUENCY Emitted power Measurement periodicity Transmission interval Immediate following measurement or batch at 30mn to 48h (configurable) Data compression By differential coding (configurable) Activation method Activation by Personalization (ABP) or Over-The-Air Activation (OTAA) Data encryption TEMPERATURE MEASUREMENT ± 0.2°C in nominal range (+6°C +97°C); ± 0.5°C in range (-15°C +5°C) and (+98°C +110°C); ± 1°C in range (-30°C -16°C); otherwise ± 1.5°C Resolution (in nominal range) ALERTS Minimum or maximum thresholds (configurable) in the...