Catalog excerpts
SMART BUILDING Indoor Temperature Sensor The Temperature sensor is a SIGFOX® wireless sensor operating on battery that measures and transmit over long distance indoor temperature. HVAC (Heating, Ventilating and Air Conditioning) Building management Logistic / storage Data centre / IT server room BENEFITS & KEY FEATURES SIGFOX® Easy to use and deploy Differential data compression for temperature batch report Up to 12 years autonomy (data compression mode) Temperature and Humidity measure – Range : 0°C / +40°C – Accuracy: +/-0,5°C – Resolution: 0,1°C QUALITY & RELIABIITY RoHS compliant CE Compliant The Indoor Temperature Sensor from nke Watteco is an easy-to-use wireless sensor operating from any wireless network using the SIGFOX® protocol. The measured temperature can be locally stored, concatenated and compressed. This unique batch mechanism significantly reduce the amount of data transmission. The sensor is easy to deploy and maintain : - NFC tag for identification (Part type, serial number and manufacturing number) - Magnetic switch to activate/de-activate the sensor Powered through a 3.6V/3600mAh Lithium battery, in data-compressed mode it allows an autonomy up to 12 years when measuring 1 times per hour and transmitting data one time per day. The Indoor Temperature Sensor has the following alarm capabilities: - ON/OFF - Low battery voltage - Min & Max temperature - Anti-tamper (against opening and detachment). The configuration of the transmitter can be done at factory or on-site allowing the choice of measurement cycle, measurement, information frame radiotransmission periodicity, alarms threshold values, data compression mode THE LARGEST IOT PRODUCTS RANGE FOR YOUR PROJECT nke WATTECO is a European leader in the design and manufacture of intelligent IoT devices to fit to all remote reading and data collection solutions. nke WATTECO is a LoRa Alliance®. nke WATTECO - 6 rue Gutenberg, ZI Kerandré , 56700 Hennebont, France - Tel: +33 2 97 85 67 65 For more information, contact us: info.wa
Open the catalog to page 1Indoor Temperature Sensor TECHNICAL CARACTERISTICS RF TRANSCEIVER Data encryption Measurement cycles Measurement frame transmission cycles Information frame transmission cycles From 0 day to 30 days in 1day step Alarm detection Data compression Unified degree days measurement Activate / de-activate Alarm level Battery level: 0,1V to 3,6V by 0,1V step Temperature min and max: 0°C to +40°C by 1°C step TEMPERATURE MEASURE Power supply Autonomy within a +10°C to +25°C temperature range 12 years: Data compressed / 1 measure per hour / 1 transmit per day 9 years: Data not compressed / 1 measure...
Open the catalog to page 2All Nke WATTECO catalogs and technical brochures
-
Skyd’O Sensor
2 Pages
-
Pulse S0
2 Pages
-
PRESS’O
2 Pages
-
Outdoor Temperature Sensor
2 Pages
-
MONIT’O
2 Pages
-
ModBus/LoRaWAN® Bridge
2 Pages
-
Lev'O+
2 Pages
-
INTENS'O
2 Pages
-
IN’O
2 Pages
-
VMC Gas & Sanitary Sensor
2 Pages
-
Flash’O sensor
2 Pages
-
FLASH'O
2 Pages
-
Clos’O Sensor
2 Pages
-
VAQA'O +
2 Pages
-
VAQA'O
2 Pages
-
AMBIENT TEMPERATURE SENSOR
2 Pages
-
Atm’O sensor
2 Pages
-
Pulse Sens'O AtEx zone 1
2 Pages
-
Alarm Report sensor
2 Pages
-
Remote Temperature Sensor 2
2 Pages
-
Remote temperature
2 Pages