Flash’O sensor
2Pages

SMART METERING Flash’O sensor Flash’O is a SIGFOX® meter interface radio transmitting the accumulated flash LED numbers from any pulse meters: water, gas, electricity, energy. APPLICATIONS  Wireless AMR – Smart metering  Infrastructure: all meters with flash LED interface can be integrated quickly and cost-effectively into a SIGFOX® network without expensive and timeconsuming cabling. SIGFOX® Easy to use and deploy Data compression for batch report IP55 Up to 12 years autonomy Up to 250 pulses/second Flash LED rate counting and accumulation QUALITY & RELIABIITY  CE Compliant  RoHS compliant  Radio-equipment directive 2014/53/UE The SIGFOX® Flash’O from nke Watteco. is a long range, low power consumption, high performance and high quality sensor. It operates with any commercial electronic meter products equipped with a blinking LED and provides connection to the SIGFOX® wireless network. The accumulated number of flashes can be locally stored, concatenated and compressed. This unique batch mechanism significantly reduce the amount of data transmission for demanding applications such as load curve and drastically increase the autonomy. Flash’O counts and accumulates the number of LED flashes that occurred since it has been commissioned. Based on the Impulsions per kWh or Wh indicated on the meter, the energy and power consumption can be computed. Powered through a 3.6V lithium battery, in data compression mode, the estimated autonomy is up to 12 years when transmitting data one time per day and up to 8 years when reporting data one time per hour. The optical probe is easily attached either by magnets or by velcro. Cable-length is approximately 0.5m. NOUS AVONS LES CAPTEURS ADAPTÉS À VOS USAGES nke WATTECO est un leader européen concevant et fabricant des capteurs et actionneurs radiofréquences intelligents ainsi que des solutions de télérelève et de télécollecte de données multi protocoles. nke WATTECO est membre de la LoRa Alliance®. © nke WATTECO – Siège social : 6 rue Gutenberg, ZI Kerandré , 56700 Hennebont, France - Tel: 33 (0)2 97 85 67 65 Pour plus d’information, conta

Flash’O sensor TECHNICAL CHARACTERISTICS RF TRANSCEIVER Data encryption Measurement cycles Measurement frame transmission cycles Information frame transmission cycles From 0 day to 30 days in 1day step Data compression Alarm detection Alarm level Battery level: 0,1V to 3,6V by 0,1V step Supports any meters LED flashing up to 250 pulses per second Note that autonomy is reduced at max. flash rate. Flash rate POWER Power supply Autonomy within a +10°C to +25°C temperature range >12 years in data compression mode when transmitting 1 time per day >8 years in data compression when transmitting 1...