AMBIENT TEMPERATURE SENSOR
2Pages

SMART BUILDING AMBIENT TEMPERATURE SENSOR The sensor measures the ambient temperature in buildings, flats, houses, etc. The sensor is equipped with a detection system that detects the removal of its wall base, and an alert is sent immediately to remove any doubt about the temperature measurement. The data is transmitted via a public or private LoRaWAN® radio frequency network. APPLICATIONS  Supervision of heating, ventilation and air conditioning installations.  Energy optimisation of buildings (residential, tertiary). LoRaWAN®, Class A Easy to install and use 10 years of autonomy Pull-out detection Temperature measurement - Range: +0°C to +55°C - Accuracy: +/-0.2°C - Resolution: 0.1°C CERTIFICATION  RED, RoHS Sensors delivered without WATTECO marking The sensor measures the indoor ambient temperature. Data transmission over the public or private LoRaWAN® network is done periodically or immediately in case of an alert: - Minimum or maximum temperature threshold exceeded. - Sensor unclipped from its wall mounting. Installation and commissioning are quick and easy. The sensor is equipped with: - a switch (ILS) for activation and deactivation, - LEDs to monitor the configuration and pairing to the network. Measurement data is transmitted individually or aggregated and compressed (batch mode) before being transmitted over the LoRaWAN® network. Batch mode significantly reduces the amount of data transmitted while preserving the sensor's autonomy. Powered by a 3.6V/2600mAh battery, the autonomy of the sensor with 85% of the battery capacity used and configured for 1 measurement every 10 minutes and 1 transmission per hour is more than 8 years in SF12 and 10 years in SF9. The battery voltage level can be regularly monitored remotely. Each sensor is identified by a QR code on the label and an NFC tag inside the housing. THE LARGEST IOT PRODUCTS RANGE FOR YOUR PROJECT WATTECO is a European leader in the design and manufacture of smart IoT devices to suit all remote reading and data collection solutions. WATTECO is a LoRa Alliance® member. WATTECO - 6 rue Gutenberg, ZI Kerandré , 56700 Hennebont, France - Tel: +33 2 97 85 67 65 For more information, contact us: info.watteco@n

AMBIENT TEMPERATURE SENSOR TECHNICAL DATA Frequency Transmit power Measurement periodicity 10 minutes to 24 hours (configurable) Transmission interval Immediate following measurement or batch at 30min to 48hrs (configurable) Data compression By differential coding (configurable) Activation method Activation by Personalization (ABP) or Over-The-Air Activation (OTAA) Data encryption ALARMS Temperature Minimum or maximum thresholds configurable from 0°C to 50°C in steps of 0.1°C On sensor removal (unclipping the sensor from its wall mount) TEMPERATURE MEASUREMENT Resolution (in nominal range)...