Alarm Report sensor
2Pages

SMART BUILDING SMART INDUSTRY Alarm Report sensor SIGFOX® Alarm Report Sensor transforms any dry contact sensor into a remote wireless sensor that monitors industrial equipment status and alarms APPLICATIONS  Industry – Process control and automation, power line defect detection  Water Trea®ent, Agriculture Irrigation –water valves and pumps, alarm status…  Food production & distribution – monitor cooling equipment, fridge door contact status, alarms status…  HVAC & building management – monitor air valves and pumps, heaters/coolers, alarm status, human presence, doors contact status, lights… BENEFITS & KEY FEATURES  SIGFOX®  Easy to use and deploy  15 years battery autonomy ( 1 state change report per day) QUALITY & RELIABIITY  RoHS compliant  CE compliant The Alarm Report Sensor from nke Watteco is a narrow band, long range, low power consumption, high performance and high quality , SIGFOX® device transforming any dry contact sensor into a wireless alarm sensor that instantaneously transmits any input state change. If the input state of the Alarm Report Sensor changes more than one time within a time interval limit set by the user, it instantaneously reports an alarm to notify that the monitored equipment is not operating properly. The Alarm Report Sensor is specifically designed for users looking to remotely monitor any I/O signals from industrial equipment such as pumps, fans, valves, heaters, coolers, motors, generators, lights, door (ON/OFF status, alarms, …) The sensor is easy to use, deploy and maintain: - NFC tag for identification (Part number, serial number and manufacturing number) - Magnetic switch to activate/de-activate the sensor Powered through a 3.6V/3600mAh Lithium battery, it allows an autonomy up to 15 years when reporting one I/O state change per day. The configuration of the transmitter can be done at factory or on-site allowing the choice information frame radio-transmission periodicity and alarms threshold values. THE LARGEST IOT PRODUCTS RANGE FOR YOUR PROJECT nke WATTECO is a European leader in the design and manufacture of intelligent IoT devices to fit to all remote reading and data collection solutions. nke WATTECO is a LoRa Alliance®. nke WATTECO - 6 rue Gutenberg, ZI Kerandré , 56700 Hennebont, France - Tel: +33 2 97 85 67 65 For more information, contact us: in

Alarm Report sensor TECHNICAL CHARACTERISTICS RF TRANSCEIVER Data encryption Information frame transmission cycles From 0 day to 30 days in 1day step Alarm detection Always active 1: Normally Open / 0: Normally closed Alarm level Battery level: 0,1V to 3,6V by 0,1V step Minimum time between 2 consecutives state change: from 1min to 240min by 1 min step INPUT CHARACTERISTICS Power supply Autonomy within a +10°C to +25°C temperature range 15 years: 1 input state change reporting per day Part number, serial number and manufacturing number Buzzer Indicator Network pairing / unpairing &...