measure analyse optimise OCM F Flow Meter for part filled and full Pipes, Channels and Flumes

Reasonable purchase costs Reliable, with more than 30 years of product experience Easy mounting without additional constructions Integrated 3-step controller Measurement in heavily polluted and abrasive media Fix installation flow meter for slightly to heavily polluted media in part filled and full pipes, channels and flumes. General Discription Wedge Sensor The OCM F flow metering system utilises a fully bidirectional ultrasonic velocity sensor. The intelligent Doppler sensor detects and directly evaluates the flow velocity. Other than with mag meters, this method has an absolutely stable zero...

Transmitter and Receiver Crystals p = Level measurement with pressure (combi sensor) h = Level measurement with ultrasound (external sensor) VP = Particle velocity a = Transmission angle between ultrasound and flow direction Operation / Programming Thanks to the intuitive user interface it is very easy to set up the OCM F for the requirements of various applications. Additional input devices like Computers etc. are not needed. Programmed settings are indicated clearly. The measurement principle is based on the classic Doppler method where an ultrasonic signal with a defined frequency is transmitted...

Type R2: 200 / Type R3: 300 (with stop ball valve) retaining element M4 x 80 alignment screw (”Installation aid”) Countersunk holes DIN 66-5, but with d1 = ø6.5 mm for direct fastening Slotted holes for fastening on pipe mounting system Wedge Sensor Power consumption Wall mount enclosure Ex approval (option) Operating temperature Storage temperature Max. humidity Operation Input Data memory Transmitter Power supply Wall mount enclosure also suitable for DIN rail mounting. • 100 to 240 V AC, +10 % / -15 %, 47 to 63 Hz or • 24 V DC ±15 %, 5 % residual ripple AC 7 VA typical. CD: 6 W typical • material:...