Catalogs >
NIVUS GmbH >
Float Switch Type TA

Float Switch Type TA
2Pages

Catalog excerpts

Easy to install Cost-efficient Suitable for any installation position No response delay Float Switch Type TA Limit Level Type TA Float Switch Maintenance-free Reliable High switching capacity Ex approval for Zone 1 according to ATEX (optional) Float Switch Type TA The float switch is made for liquid level monitoring and is appropriate for direct pump control in all industrial applications. The switch can be used e. g. as minimum, maximum, filling, emptying contact as well as for protection against overflow or idle running. It can be installed directly in tanks using a screw joint or can be inserted into open tanks from the top. If inserted from the top, the switching point is determined by using a ballast weight. NIVUS GmbH • Im Taele 2 • 75031 Eppingen, Germany • Internet: www.nivus.com Phone: +49 (0)7262 / 9191-0 • Fax: +49 (0)7262 / 9191-999 • E-Mail: info@nivus.com The float switch enclosure is made of robust plastic material. The micro switch is encapsulated completely water-tight. Moreover the unit consists of several air chambers. Therefore it is almost unsinkable even if damaged mechan

Open the catalog to page 1

Limit Level _Type TA Float Switch Specifications Dimensions Level control using 2 laterally installed switches Level control using a switch inserted from top plus ballast weight Specifications subject to change. H:\Schwimm\FMO0_db-en.cdr / Rev. 03 - 12.2016 You can find more information in the instruction manuals or under www.nivus.com Instrumentation For Water Industry NIVUS GmbH • Im Taele 2 • 75031 Eppingen, Germany • Internet: www.nivus.com Phone: +49 (0)7262 / 9191-0 • Fax: +49 (0)7262 / 9191-999 • E-Mail: info@nivus.com

Open the catalog to page 2

Float Switch Type TA 2Pages

Catalog excerpts

All NIVUS GmbH catalogs and technical brochures

Float Switch Type TA
2Pages