Hydrostatic, Pressure -I _AquaBar Submersible probe ■ Stainless steel diaphragm ■ Piezoresistive measuring cell ■ 2-wire technology (output 4-20 mA) ■ Integrated overload protection ■ High accuracy ■ High electrical operational reliability Specifications are subject to change. H:\AquaBar\ab-db-en.cdr / Rev. 02 - 06.06.2016 The diameter of only 27 mm allows to use the AquaBar in stand pipe applications which are mainly used in ground water level measurement and deep well measuring. The proven piezoresistive measurment principle ensures high long-term stability and operational reliability. The AquaBar is highly resistant against electrical faults caused by incorrect wiring, short circuit and overvoltage. The robust probe enclosure is made of 1.4571 stainless steel with a 1.4435 stainless steel diaphragm. It is held by a self-supporting PUR cable. The probe can be suspended e.g. on manhole walls by using a straining clamp. Utilising the widely used 2-wire technology, the installation costs are very low. Special measurement ranges and customised versions are available on request. Instrumentation For Water Industry NIVUS GmbH • Im Taele 2 • 75031 Eppingen, Germany • Internet: www.nivus.com Phone: +49 (0)7262 9191-0 • Fax: +49 (0)7262 9191-999 • E-mail: [email protected]

Hydrostatic, Pressure _AquaBar Submersible Specifications Submersible probe Viton® is a registered trademark of DuPont Dow Elastomers You can find more information in the instruction manual or on www.nivus.com Specifications are subject to change. H:\AquaBar\ab-db-en.cdr / Rev. 02 - 06.06.2016 NIVUS GmbH • Im Taele 2 • 75031 Eppingen, Germany • Internet: www.nivus.com Phone: +49 (0)7262 9191-0 • Fax: +49 (0)7262 9191-999 • E-mail: [email protected]