Catalogs >
NIVELCO Process Control Co. >
NIVELCO LEVEL SWITCHES - VIBRATION FORK FOR LIQUIDS AND SOLIDS - NIVOSWITCH

NIVELCO LEVEL SWITCHES - VIBRATION FORK FOR LIQUIDS AND SOLIDS - NIVOSWITCH
8Pages

Catalog excerpts

NIVELCO LEVEL SWITCHES - VIBRATION FORK FOR LIQUIDS AND SOLIDS - NIVOSWITCH - 1

SZINTTÁVADÓK LEVEL SWITCHES VIBRATING FORK LEVEL SWITCHES FOR LIQUIDS AND SOLIDS

NIVELCO LEVEL SWITCHES - VIBRATION FORK FOR LIQUIDS AND SOLIDS - NIVOSWITCH - 2

MAIN FEATURES ■ Compact and mini compact type ■ Rod extension up to 3 meters (10 feet) ■ Chemical resistance plastic (PFA) coated version ■ Polished vibrating part ■ Hygienic versions with various process connections and 0.5 micron fine polishing ■ Adjustable sensitivity ■ Relay or electronic output ■ Switching performance does not depend on the change of liquid conductivity, dielectric constant, pressure and temperature ■ Medium temperature max. +130 °C (266 °F) ■ Output test with optional test magnet ■ Ex, FM, CSA and DNV GL versions ■ IP67, IP65 / IP68 protection INDUSTRY SEGMENTS ■...

Open the catalog to page 2

NIVELCO LEVEL SWITCHES - VIBRATION FORK FOR LIQUIDS AND SOLIDS - NIVOSWITCH - 3

As per order codes -40 °C ... +130 °C (-40 °F ... +266 °F) (see: temperature diagrams) Process connection Medi um temperature Ambient temperature Medium pressure Medium density Medi um viscosity Power supply Power consumption Housing material Electrical connection Electrical protection Ingress protection Mass 2-wire AC: 20 - 255 V AC; 3-wire DC: 12 - 55 V DC AC: depending on load; DC: < 0.6 W Stainless steel 1.4571 (316Ti) Connector, or 3 m (10 ft) ca / 4x 0.75mm2 (AWG 18) / 5x 0.5mm2 (AWG 20) AC version: Class I; DC version: Class III DIN connector type: IP65; M12 connector type: IP67,...

Open the catalog to page 3

NIVELCO LEVEL SWITCHES - VIBRATION FORK FOR LIQUIDS AND SOLIDS - NIVOSWITCH - 4

ORDER CODES (not all code variation available) Vibrating fork level switches for liquids NIVOSWITCH RP«-»M-W> Type Process connection (l) The order code of an Ex version product should end in "Ex" (2) Not available for the codes that starting with RA, RC, RG (3) Only available for the codes that starting with rA, RC, RG (4) Only available for the codes that starting with RN and RM (5) Cable length maximum 30 m (6) Only available with 1" BSP process connection (7) Max. 6 bar (87 psi), -20 °C ... +90 °C (-4°F ... + 194°F) (8) Ex type not available Output / Ex 2-wire AC 3-wire DC 2-wire DC...

Open the catalog to page 4

NIVELCO LEVEL SWITCHES - VIBRATION FORK FOR LIQUIDS AND SOLIDS - NIVOSWITCH - 5

Compact and mini compact type Power supply Can be done with appropriate wiring in case of mini compact type with integrated cable. TEMPERATURE DATAProcess pressure - medium temperature PP flange version RRH-301 Process pressure - medium temperature OPERATION MODE SWITCHES Compact

Open the catalog to page 5

NIVELCO LEVEL SWITCHES - VIBRATION FORK FOR LIQUIDS AND SOLIDS - NIVOSWITCH - 6

OUTPUT DATA RESPONSE TIME DIAGRAM Compact type Mini compact type <™>APPROVED FM US, Certificate No.: FM16US0224X BKI lECEx, Certificate No.: IECEx BKI 16.0002 issue No.: 0 BKI ATEX, Certificate No.: BKI10ATEX0012X/1 BKI ATEX, Certificate No.: BKI16ATEX0031 BKI ATEX, Certificate No.: BKI16ATEX0011 WIRING Mini compact (connector version) Operation mode LED Compact Marine Approval Certificate No.: TAA000018W Power supply connector Density switch® Relay output Fail-safe Density switch® switch® ® Only for 3-wire DC versions. ® Only for vibrating forks for solids. RFM-500

Open the catalog to page 6

NIVELCO LEVEL SWITCHES - VIBRATION FORK FOR LIQUIDS AND SOLIDS - NIVOSWITCH - 7

RECOMMENDED SET-UP VARIATION Safe (Non-Ex) Zone Suggested cable: LIYCY 2x0.75-2x1.5 mm2 ■ Applied in low viscosity medium (no risk of subsidence remaining on the fork-tines) any of the mounting varieties shown is possible. ■ Applied in higher viscosity medium (risk of subsidence remaining on the fork-tines) only vertical (top) mounting can be suggested. ■ If applied as side mount, take care of the positioning mark (mark "O"). ACCESSORIES TO ORDER Name ^ For minimum 300 mm insertion length and maximum 6 bar medium pressure. RPS-101-0 test magnet for mini compact versions

Open the catalog to page 7

NIVELCO LEVEL SWITCHES - VIBRATION FORK FOR LIQUIDS AND SOLIDS - NIVOSWITCH - 8

Other process connections ■ DIN, ANSI and JIS flanges stainless steel, PP or plastic (PFA) coated stainless steel ■ DN40 and DN50 pipe-coupling process connections (DIN 11851) ■ 1 1/2" and 2” TriClamp process connections (ISO 2852) ■ Other hygienic (food-industry) process connections

Open the catalog to page 8