Catalogs >
NIVELCO Process Control Co. >
NIVELCO LEVEL SWITCHES - CONDUCTIVITY - NIVOCONT K

NIVELCO LEVEL SWITCHES - CONDUCTIVITY - NIVOCONT K
4Pages

Catalog excerpts

NIVELCO LEVEL SWITCHES - CONDUCTIVITY - NIVOCONT K - 1

LEVEL SWITCHES CONDUCTIVE LEVEL SWITCHES

NIVELCO LEVEL SWITCHES - CONDUCTIVITY - NIVOCONT K - 2

GENERAL DESCRIPTION NIVOCONT K level switches, based on the conductivity principle, can be applied to liquids with conductivity higher than 10 pS/cm. For detecting the level, probes are immersed into the medium. These probes (and the tank wall if conductive) serve as contacts of an electric circuit. Probes can be of single or multiple rod versions. A maximum of 4 probe rods can fit in the multiple probe socket with an additional reference probe if tank wall is not conductive. The probe length should be in accordance with the level to be detected. When the liquid level reaches the probe, it...

Open the catalog to page 2

NIVELCO LEVEL SWITCHES - CONDUCTIVITY - NIVOCONT K - 3

Single Probe s* = reference probe (1) Coble: 04 - 7 mm (00.16 - 0.27 inch) Power consumption s*=reference probe PROBES, ACCESSORIES

Open the catalog to page 3

NIVELCO LEVEL SWITCHES - CONDUCTIVITY - NIVOCONT K - 4

PP socket carbon steel socket Metal Plastic probe 1.4571 Housing Submersible ^Only with plastic housing. (2)Only available in 0.5 m steps. NIVELCO PROCESS CONTROL CO. H-1043 Budapest, Dugonics u. 11. Tel.: (36-1) 889-0100 ■ Fax: (36-1) 889-0200 E-mail: sales@nivelco.com

Open the catalog to page 4